News

1.The pump should be placed smoothly to reduce vibration and noise. 2. There is a flexible or rigid sub-section (about 80~100 cm) between the outlet flange of the peristaltic pump and the hose link, so that the hose can be replaced. 3. When the pump starts, there’re no needs to prime the pump. Therefore, the installation height of the pump can be above the material level, and auxiliary pipelines and starting facilities are not required, but the...

Method for improving filling accuracy of peristaltic pump： 1. Using the time timer to control the filling amount, this method is easy to implement, but the error is also large. The main reasons are the influence of temperature and the influence of program structure. The single-chip microcomputer works by the frequency output of the crystal oscillator, and the temperature has an effect on the crystal oscillator frequency. A good crystal...

When the peristaltic pump is used normally, the output flow of the peristaltic pump is very unstable, exclude some intuitive reasons such as pump heads, pump tubes, drivers, etc. besides, there is another reason that is easily ignored. When the peristaltic pump transfering liquid, the influence of liquid viscosity, head and liquid properties on the flow rate of peristaltic pump.  1. Effect of liquid viscosity on peristaltic pumps The...

1、 Cleaning of peristaltic pump shell and hose  During the use of the peristaltic pump, pay attention to cleaning the pump shell and pump hose. Due to the peristaltic pump is a relatively precise instrument, mainly rely on the pump shell to keep a high-precision gap, so the pump hose has to be squeezed. If the inflowing liquid sticks to the pump shell pressure roller and pressure block and the pump hose due to damage to the pump hose, will...

Peristaltic pump: the transfering medium does not contact with the pump body, it is beneficial to transfer some media which are highly corrosive to metals, such as various acid and alkali solutions or some salt solutions containing chloride ions; easy to clean and disassemble. Due to the medium only flows in the hose, clean hose only, installation and removal of peristaltic pump hoses are relatively simple, just tap the motor to complete the...

Peristaltic pumps are not often used in daily life, mainly used in chemical, mining, metallurgy and papermaking paint and coatings industries, therefore, according to the operation and use of peristaltic pump, it can be divided into:  1. Flow type peristaltic pump: except having basic function of peristaltic pump, also increased flow display, flow correction, communication and other functions.   2. Speed-regulating peristaltic...

Peristaltic pump: the transfering medium does not contact with the pump body, it is beneficial to transfer some media which are highly corrosive to metals, such as various acid and alkali solutions or some salt solutions containing chloride ions; easy to clean and disassemble. Due to the medium only flows in the hose, clean hose only, installation and removal of peristaltic pump hoses are relatively simple, just tap the motor to complete the...

Peristaltic pump hose material is made of silica gel, but there are different kinds of silicone. Such as ordinary silica gel, weather glue, food grade silica gel and so on.  Ordinary silica gel: this is one of the more used silica gel on the market, common material, cheaper price, many manufacturers use this material as a peristaltic pump hose. The gas phase glue: gas phase glue and ordinary glue is the opposite, its transparency, ...