YT15 Medium Flow Rate Pump Head

Short Description:

Flow Range:

Max Number of Channels:

Send Email To Us

YT15 Medium Flow Rate Pump Head

YT15 pump head can load various tubes, wide flow, 4 rollers, lower pulsation, easy to replace tubes and compact structure. Can be cascade multi pump heads, pressure tube clearance adjustable, realize higher working pressure and prolong the tube life. PPS material is resistance to corrosion liquids and the pump head is solid and durable.

Flow range: 0.006~2300 ml / min

Roller : 4

Tubing Method: Whole tube

Shell Material: PPS



■ YT15 pump head flow range is 0.006~2300 ml/min, suitable for 13#, 14#, 19#, 16#, 25#, 17#, 18# tube, flow range is very wide.

■ With self-adapting clamping device, it is easy to clamp tubes of different thicknesses without manual adjustment.

■ Classic pump tube locking mechanism, replacing tube only takes several seconds, easy to deal with frequent tube change conditions.

■ Special pressure tube structure, reduce wear and tear of pump tube and accidental rupture caused by misoperation.

■ The pressure tube clearance can be fine-tuned manually, when reducing tube clearance it can convey the larger pressure, and increasing tube clearance it can prolong the life of pump tube. At the same time, it can adapt to the deviation caused by different processing accuracy of pump tube.

■ PPS special functional plastic shell and 4 SS rollers ensure that the pump head can meet the high-strength use requirements such as high speed, long time, simultaneously reduce transmission pulsation.

■ Multiple pump heads can be superposition, maximum expansion to 4 channels.

■ When two pump heads are series connection, the rollers are staggered at 45 degrees, which can obviously reduce the fluid pulsation and increase the transmission speed.

■ YT15 pump head can match motor such as stepper motor, servo motor, AC motor, DC motor and other types of motor.


Pump Head Specification

Channel 1 channel (Single pump head)
Roller 4
Tubing Method Whole tube
Shell Material PPS
Roller Material SS304
Pressure Tube Clearance Adjustable
Net Weight 620g
Bear Liquid Temperature Less than 200℃
Corrosion Resistance PPS is resistant to most acid, alkali, salt liquids and organic solvents


YT15 Pump Head Flow Parameter

Tube material silicone, pharmed, viton, tygon 3603, Norprene chemical, Norprene a-60-F, Norprene a-60-G Wall thickness 1.6mm
ID (mm) 0.8 1.6 2.4 3.1 4.8 6.4 7.9
13# 14# 19# 16# 25# 17# 18#
mL/rpm 0.06 0.22 0.48 0.8 1.67 2.83 3.8
Max Flow (600rpm, ml/min) 36 130 286 480 1000 1700 2300

★ Above flow parameters are obtained by using silicone tube to transfer pure water under normal temperature and pressure,in actually using it is effected by specific factors such as pressure, medium, environment. Above for reference only.


Max series connection expand to 4 channels



Leave Your Message