WSP3000 Peristaltic Pump

Short Description:

Flow: 1μL~3000μL
Max: 16 Channels

Send Email To Us

Microliter Peristaltic Pump WSP3000

Lead Fluid WSP3000 series products are mainly used for high-precision filling of various types and viscosity liquids, filling range 25μL~3mL. It has the advantages of high accuracy, high repeatability, high efficiency, high cleanliness, maintenance
friendly and simple operation. It can be used manually and automatically.

Typical Applications

• Magnetic beads solution • Glycerol • Glycerol serum • Glycerol ethanol
• Glycerol paraffin oil • Glycerol Mix reagent • Glycerol protease k
• Cell lysis buffer • Urea


• High filling accuracy, the error is less than ±0.3%;
★ Can achieve micro upgrade filling, when filling 50 μL, the error is less than ± 0.15 μ L. The accuracy error is less than ± 0.3%;
• Modular design, easy to expand, compact, multiple pumps can be cascaded to form a multi-channel filling system.
• Supports single channel, dual channel, three channel, and four channel filling systems.
• The man-machine interface directly input liquid volume parameters, easy to operate.
★ Design of special mechanical structure to achieve the perfect combination of accuracy, efficiency and stability.
★ Multi roller positioning, filling efficiency can reach 2 bottles per second.
• High precision servo motor drive, large torque, free-maintenance.
• Small volume, spring-type pressurized tube structure and high working efficiency.
• Suction back function,zero dripping,instant shutdown.
★ Nano-scale filling needle,which is hydrophobic and can achieve zero liquid suspension.
• The pump tube is easy to disassemble, which is conducive to cleaning and sterilization, and supports CIP and SIP.
★ The wear of the pump tube is small, the continuous service life can reach 1000 hours, the 12-hour capacity.
attenuation is less than 1%, and the maintenance is simple.
• It can be operated manually or used with an automatic production line.


Technical Parameter

Parameter WSP3000
Filling range 1μL~3000μL
Accuracy 10μL±0.15, 50μL±0.15, 100μL±1, 500μL±6, 1000μL±10, 3000μL±18
Channel 1(Single), up to 16 channels cascade are supported
Filling time 0.01~999.99S
Interval time 0.40~3600S
Filling times 1~10000
Tubing ID 0.5~4.8mm
Display 7 inch HD color touch screen
External control Dry contact start signal, lack of bottle filling stop signal, feedback signal
House material Aluminum alloy
Maximum pressure 0.15Mpa
Power supply AC 100~240V
Power consumption 36W(single channel), 60W(double channels),85W(three channels),110W(four channels)
Working environment Temperature 0 ~ 40℃, relative humidity<80%
IP grade IP31
Controller weight 1.5kg
Driver weight 3.2kg

Characteristics Comparison

Microliter Peristaltic Pump Traditional Peristaltic Pump
Filling accuracy When filling 10 μ L ,error less than ± 0.15 μ L. When filling 100 μ L, error less than 1 μ L. Accuracy error less than ± 0.3% not suitable for filling less than 100μL, the error of 200μL is less than ±3μL
Filling efficiency Can reach 120 bottles/minute. the output is less than 40 bottles per minute.
Volume decrease Run continuously for 12 hours with less than 1% attenuation, and no calibration is required for a day’s work. The continuous running time is 12 hours, and the attenuation is more than 5%; usually it needs to be calibrated every 2 hours.
Tube life More than 1000 hours when it runs continuously. Between 70 to 100 hours.
Characteristics Perfect combination of special mechanical structure and tube kits realizes zero hanging liquid. Traditional structure,its easy to hang liquid at the tip of the needle


Compared with Plunger Pump

WSP3000 Peristaltic Pump Plunger Pump
Cleanliness no dead volume,no effusion,material only contact with clean pipeline,no pollution dead volume, effusion,material contact with the pump head cavity, clean not thoroughly
Ease of Use filling different material,only replace the pipeline to avoid cross contamination, low cost,simple maintenance One pump can only fill one material, complicated maintenance
Universality the material may contain particles such as magnetic beads material must be clean and free of impurities
Filling range 1μl~3000μl replace the pump tube adjustable range<5 times
Dripping retractable without dripping easy to drip
Cavity Shedding low extrusion strength,no mechanical friction,smooth cavity wall without shedding continuous mechanical friction,the cavity is easy to fall off particles


Microliter Peristaltic Pum Ceramic Plunger Pump
Cleanliness No blind area, no accumulation of liquid, materials only contact with clean tube, no pollution. Blind area, liquid accumulation, contact between material and pump head cavity, and insufficient cleaning.
Usability Filling different materials requires only replacement of tubes to avoid cross contamination, simple maintenance, and low cost A pump can only fill one material, and the maintenance is complex.
Universal The liquid may contain magnetic beads and other particles. The liquid must be clean and free of impurities.
Filling range 1μL~3000μL(single channel) 0.3~100mL,0.5~500mL(single channel)
Liquid drop No dropping Easily Dropping
Fallen objects Low extrusion strength, no mechanical friction, and smooth inner wall of the cavity without shedding objects Mechanical continuous friction, easy detachment of particles from the cavity


Filling Accuracy and Efficiency

Filling Volume Time Error Value Accuracy 12 Hour Decay Rate
1μL 0.01-0.02s ±0.15μL <±15% <1%
5μL 0.05-0.1s ±0.15μL <±3% <1%
10μL 0.1-0.2s ±0.15μL <±1.5% <1%
20μL 0.2-0.4s
50μL 0.5-1.0s
100μL 0.5-1.0s
200μL 0.44-0.8s
300μL 0.4-0.8s
500μL 0.35-0.55s
800μL 0.32-0.48s
1mL 0.7-1.1s
3mL 0.9-1.1s ±18μL <±0.6% <1%

1.Test condition for the above data:
At normal temperature and pressure, with the level of water unchanged, silicone hose is used for transmission. The inlet end is 1 meter and the outlet end is 1 meter. All weighing data are measured by Sartorius high-precision balance with accuracy of one hundred thousandth.
2.The error value and accuracy data are based on 50 sets of continuous measurements, and this data does not include the
influence of the last drop.
3.12-hour decay rate:
Under the condition of 60 bottles/minute, after the equipment is installed and debugged, run for 3 hours first, then record 10 sets of filling data every 12 hours, run continuously for 5 days and take the maximum value.
4.During the filling process, the precipitation of dissolved gases in the liquid will produce bubbles, which will have a great impact on the accuracy of filling below 1000μl. Pay attention to bubble removal during use.
5.The final explanation right of above information belongs to Lead Fluid, please consult Lead Fluid engineers for more details.

Pump Dimension

Controller Dimension ( mm)

Statement:The final explanation right of above information belongs to Lead Fluid.


Leave Your Message