KT15 Series ODM Peristaltic Pump

Short Description:

Flow range:

Max number of channels:

Send Email To Us

KT15 ODM Peristaltic Pump


■ Lead Fluid KT15 pump heads are suitable for ID0.8~6.4mm,wall thickness1.6mm Pharmed ,silicone tube,Viton etc., it can run continuously under in 100rpm and Max flow rate 255ml/min,interval running,M ax speed 250rpm, max flow rate 630ml/min.
■ KT15 pump head roller body using classic elastic fixed structure,can supply precision smooth flow range and excellent tube lifetime.
■ Pressure tube gap can be fine-tuned ,suitable for different wall thickness and output more pressure.
■ Pump head body using PPS materials,rollers body using PVDF materials,excellent mechanical properties and chemical resistance.
■ Pump head cover using translucent plastic,observing pump head internal working condition conveniently,effectively preventing exterior debris into pump head, open-cover shutdown function(optional).
■Installation tube has two types: connector built-in and spring tube clip,which is suitable for more working requirement.
■ Supply type 57 stepper motor,AC synchronous motor and AC/DC gear motor drive,panel and bottom board fixed method ,it is suitable for using variable small and medium-sized instruments and equipments.


Pump Head Material

Roller PVDF( Polyvinylidene Fluoride )
Body PPS (Polyphenylene sulfide )
Pump head cover PC (Polycarbonate )
Spring SS304(304 Stainless steel )
Tube clip PVDF( Polyvinylidene Fluoride )
Tube connector PP(Polypropylene )\PTFE(PTFE )


KT15 Pump Head Flow Range Parameters

Tube material silicone,pharmed,viton Tube wall thickness 1.6mm

ID (mm) 0.8 1 .6 2.4 3. 1 4.8 6.4
13# 14# 19# 16# 25# 17#
Milliliter/Revolution 0.06 0.24 0.45 0.6 1.65 2.55
mL/MIN(continuous working maximum 100rpm) 4 24 45 60 165 *255
mL/MIN(interval working maximum 250rpm) 15 60 112 150 *412 *630

★Above flow parameters are obtained by using silicone tube to transfer pure water under normal temperature and pressure, in actually using it is effected by specific factors such as pressure, mediumetc. Above for reference only.


Pump Head Specifications

Channel 1
Roller 2
Installation tube method the whole
tube connector ( ID≥1.0mm )
Pressure tube clearance fine-tune
Net weight 150g
Motor stepper motor / AC motor / DC gear motor / AC gear motor


Motor specifications

Stepper motor

step angle 1.8° \ phase 2 \ phase voltage 3.9V \ phase current 3A \ phase resistance 1.3Ω±20% \ phase inductor 5.0mH±20% \insulation resistance ≥100MΩ \ wring definition red line -A ,green line -C ,yellow line -B ,blue line -D

60 DC gear motor

speed range :15rpm ,30rpm , 60rpm ,100rpm (other speeds can be customized)

voltage :DC12V/15W , DC24V/15W

60 AC gear motor

speed range: 15rpm ,30rpm ,60rpm ,100rpm (other speeds can be customized)

voltage: AC220V/10W

AC synchronous motor

speed range:2.5rpm ,7.5rpm ,20rpm ,30rpm , 60rpm (other speeds can be customized)

voltage :AC220V/8W


Stepper Motor Dimensions

AC Synchronized Motor Dimensions

DC/AC Gear Motor Dimensions


Leave Your Message