Produit
Pompe péristaltique d'ODM B150
brève description:
Plage de débit: ≤725mL/min
Nombre maximum de canaux: 4
Envoyez-nous un e-mail
DÉTAIL DU PRODUIT
B150MD-A
B150MD-B (curcuit board optional accessory)
(1)B150MD-A(short bracket)
(2)B150MD-B(long bracket)
■Using high precision 57type stepper motor, speed range 0.1-150rpm, equipped with easy fixed support,high precision flow controlling, widely flow range,long motor lifetime, smaller installation space , lower noise, major matching with instrument and equipment .
■Matchable Lead Fluid YZ15,YZ25,YT15,YT25, DT, DG, BZ series variety high performance pump heads.
■Panel or soleplate installation, easy installation and strong reliability.
■Choosing Lead Fluid circuit board,can precision control peristaltic pump speed, commencer arrêter,revers Support RS485 interface,reversible direction etc., output speed and start/stop signal .MODBUS communication protocol.
■Circuit board extraposition, suggest to choose the B150MD-A peristaltic pump with installation small space.
■Circuit board postposition, suggest to choose the B150MD-B peristaltic pump with longer bracket support.
B150MD-A, B150MD-B Suitable Pump Head And Flow Rate Range
Tête de pompe | Canaux | Tubes |
Flow Rate Per Channel |
|
(Ml/Min) | ||||
DG6-1(6patin à roulettes) |
1, 2, 3, 4 |
wall thickness0.8~1,ID≤3,17 mm | 0.0002~49 | |
DG10-1(10patin à roulettes) |
1, 2, 3, 4 |
wall thickness0.8~1,ID≤3,17 mm | 0.0001~41 | |
DT10-18 |
1, 2 |
13#14#,wall thickness0.8~1,ID≤3,17 mm |
0.0002~82 |
|
YZ15 |
1 |
13#14#19#16#25#17#18# |
0.006~570 | |
YZ25 |
1 |
15#24# |
0.17~425 | |
YT15 |
1 |
13#14#19#16#25#17#18# |
0.006~570 | |
YT25 |
1 |
15#24#35#36# |
0.17~725 | |
DT15-14 |
1 |
19#16#25#17# |
0.066~560 | |
DT15-24 |
2 |
19#16#25# |
0.066~330 | |
BZ25-24 |
1 |
24# |
0.28~420 | |
BZ25-15 |
1 |
15# |
0.17~250 | |
BZ15-16 |
1 |
16# |
0.08~120 | |
BZ15-14 |
1 |
14# |
0.02-32 |
※Above parameters get from transmitting pure water in silicone tube under normal temperature and atmospheric pressure, in actually using it is effected by specific factors such as tube material, pression, medium characteristics, environment etc., please consult Lead Fluid engineers or agents in advance.
SPECIFICATIONS
Motor Specification
Plage de vitesse | 0.1-150tr/min |
Step angle | 1.8° |
Phases | 2 |
Phase voltage | 4.0V |
Phase current | 2UN |
Phase resistance | 2Ω±10% |
Phase inductor | 4.2mH±20% |
Insulation resistance | ≥100MΩ |
Wiring definition | red line -A ,green line -C ,yellow line -B ,blue line -D |