Sản phẩm
G6060-1S Industrial Micro Syringe Pump
Mô tả ngắn:
Gửi email cho chúng tôi
Chức năng và tính năng
■ Lead Fluid industrial micro syringe pump G6060-1S mainly suitable for high-precision micro liquid of continuous transmission, dilution and dispensing.
■ Rated stroke 60mm, standard mode 6000 steps，microstep mode up to 48000 steps.
■ Stepper motor, backlash compensation screw assembly drive, mechanical reversal with extremely high transmission stability and accuracy.
■ Can assembly a 50ul-25ml gas tight syringe, and the linear velocity range is wider.
■ The material of the valve body and the fluid path has excellent chemical properties, adapting to various neutral and corrosive solutions.
■ It can be used in various ways, it can be controlled by external signal, it can also be controlled by PC communication or it can run automatically offline.
Schematic diagram（Three-port valve）
Components
SPECIFICATION
Thông số kỹ thuật
| Linear speed | 0.01mm/s~50mm/s |
| Running time | 1.2 s~100 min（Rated stroke） |
| Flow accuracy | error≤1%（Rated stroke） |
| Flow repeatability | CV≤0.05%（Rated stroke，25℃ Deionized water，1ml and above syringe） |
| Nguồn cấp | DC 24V/2.0A |
| Syringe | 50μl/100μl/250μl/500μl/1ml/2.5ml/5ml/10ml/25ml |
| Rated stroke | 60mm |
| Control resolution | standard mode 6000 steps，microstep mode 48000 steps（rated stroke） |
| Syringe fitting | 1/4-28UNF inner thread |
| Syringe material | Borosilicate glass syringe, stainless steel push rod, PTFE piston |
| Piston drive | Động cơ bước，Backlash compensation screw assembly drive, orthogonal encoding to detect position |
| Reversing valve | standard：120°3 port |
| Valve position time | ≤250 millisecond（Between two adjacent valves） |
| Valve material | PTFE, PCTFE |
| Valve fitting | 1/4-28UNF inner thread |
| Signal input | 2 gates TTL Level signal input (drive current＞16mA) |
| Signal output | 3 gates TTL level signal outpump |
| Communication | RS485/RS232 |
| Protocol | DT protocol, ODM protocol |
| Bit rate | 9600bps/38400bps can set |
| Parameter setting | 7 digit dial switch |
| Chain communication | Supports up to 15 pump communication, no converter is needed to realize the conversion of RS232 and RS485 |
| Firmware upgrade | Upgrade via computer RS232 interface |
| Programming function | Ramp, cut-off speed, gap compensation, injection speed, cycle,Real-time termination of movement and delay, error detection, valve rotation selection, storage of 15 groups of operating modes |
| Môi trường làm việc | temperature 15℃~40℃，độ ẩm tương đối＜80% |
| Storage envirionment | -20℃～65℃ |
| Kích thước | 114×65×254mm(L×W×H) |
| Weight | 2.1Kilôgam |
Syringe
| Syringe | 50ul | 100ul | 250ul | 500ul | 1ml | 5ml | 10ml | 25ml |
| Min Flow (ml/phút) | 0.0003125 | 0.000625 | 0.001563 | 0.003125 | 0.00625 | 0.03125 | 0.0625 | 0.15625 |
| Dòng chảy tối đa (ml/phút) | 2.5 | 5.0 | 12.5 | 25 | 50 | 250.0 | 500.0 | 1250.0 |
Các thông số dòng chảy trên thu được bằng cách sử dụng ống silicon để truyền nước tinh khiết ở nhiệt độ và áp suất bình thường, trong thực tế sử dụng nó bị ảnh hưởng bởi các yếu tố cụ thể như áp lực, trung bình vv. Trên đây chỉ mang tính chất tham khảo.
Connector and Pipeline
Thread inverted taper joint
| Đặc điểm kỹ thuật | 1/4-28UNF |
| Vật liệu | PTFE |
Transmission line
| Đặc điểm kỹ thuật | 0.5×1.6mm | 1.0×1.6mm | 1.6×3.2mm |
| Vật liệu | PTFE | ||
Kích thước
UN:mm
