Produkt
G6060-1S Industrial Micro Syringe Pump
Kort beskrivning:
Skicka e-post till oss
Function and Feature
■ Lead Fluid industrial micro syringe pump G6060-1S mainly suitable for high-precision micro liquid of continuous transmission, dilution and dispensing.
■ Rated stroke 60mm, standard mode 6000 steps，microstep mode up to 48000 steps.
■ Stepper motor, backlash compensation screw assembly drive, mechanical reversal with extremely high transmission stability and accuracy.
■ Can assembly a 50ul-25ml gas tight syringe, and the linear velocity range is wider.
■ The material of the valve body and the fluid path has excellent chemical properties, adapting to various neutral and corrosive solutions.
■ It can be used in various ways, it can be controlled by external signal, it can also be controlled by PC communication or it can run automatically offline.
Schematic diagram（Three-port valve）
Components
SPECIFICATION
Teknisk parameter
| Linear speed | 0.01mm/s~50mm/s |
| Running time | 1.2 s~100 min（Rated stroke） |
| Flow accuracy | error≤1%（Rated stroke） |
| Flow repeatability | CV≤0.05%（Rated stroke，25℃ Deionized water，1ml and above syringe） |
| Strömförsörjning | DC 24V/2.0A |
| Syringe | 50μl/100μl/250μl/500μl/1ml/2.5ml/5ml/10ml/25ml |
| Rated stroke | 60mm |
| Control resolution | standard mode 6000 steps，microstep mode 48000 steps（rated stroke） |
| Syringe fitting | 1/4-28UNF inner thread |
| Syringe material | Borosilicate glass syringe, stainless steel push rod, PTFE piston |
| Piston drive | Stepper motor，Backlash compensation screw assembly drive, orthogonal encoding to detect position |
| Reversing valve | standard：120°3 port |
| Valve position time | ≤250 millisecond（Between two adjacent valves） |
| Valve material | PTFE, PCTFE |
| Valve fitting | 1/4-28UNF inner thread |
| Signal input | 2 gates TTL Level signal input (drive current＞16mA) |
| Signal output | 3 gates TTL level signal outpump |
| Communication | RS485/RS232 |
| Protocol | DT protocol, ODM protocol |
| Bit rate | 9600bps/38400bps can set |
| Parameter setting | 7 digit dial switch |
| Chain communication | Supports up to 15 pump communication, no converter is needed to realize the conversion of RS232 and RS485 |
| Firmware upgrade | Upgrade via computer RS232 interface |
| Programming function | Ramp, cut-off speed, gap compensation, injection speed, cycle,Real-time termination of movement and delay, error detection, valve rotation selection, storage of 15 groups of operating modes |
| Arbetsmiljö | temperature 15℃~40℃，Relativ fuktighet ＜ 80% |
| Storage envirionment | -20℃～65℃ |
| Dimensionera | 114×65×254mm(L×W×H) |
| Vikt | 2.1kg |
Syringe
| Syringe | 50μl | 100μl | 250μl | 500μl | 1ml | 5ml | 10ml | 25ml |
| Min Flow (ml/min) | 0.0003125 | 0.000625 | 0.001563 | 0.003125 | 0.00625 | 0.03125 | 0.0625 | 0.15625 |
| Max Flow (ml/min) | 2.5 | 5.0 | 12.5 | 25 | 50 | 250.0 | 500.0 | 1250.0 |
Ovanför flödesparametrar erhålls med användning av silikonrör för att överföra rent vatten under normal temperatur och tryck, När man faktiskt använder det utförs av specifika faktorer som tryck, medium etc.. Endast ovan för referens.
Connector and Pipeline
Thread inverted taper joint
| Specifikation | 1/4-28UNF |
| Material | PTFE |
Transmission line
| Specifikation | 0.5×1.6mm | 1.0×1.6mm | 1.6×3.2mm |
| Material | PTFE | ||
Dimensionera
UN:mm
