Izdelek
Sorodni izdelki
Peristaltična črpalka ODM serije MM10
Kratek opis:
Razpon pretoka：≤144ml/min
Največje število kanalov：1
Pošljite nam e-pošto
■Lead Fluid MM10 pump head suitable for wall thickness 0.8-0.92mm, ID 0.13-3.2mm Silicone, Pharmed, PVC, Viton etc. material tube, it can run continuously at the max flow rate 36 ml/min at 100 vrtljajev na minuto, and interval operation the max speed can reach 400 rpm and the flow rate can reach 144ml/min.
■The pump head is made of high-performance plastic material, with high rigidity and strength, and excellent wear resistance.
■The pump head adopts a unique rotary card design. It can be disassembled and assembled without tools. It is easy to replace the pump tube and clean up and maintain. There are two ways to install tube, one is tube connector built-in and the other is to install whole tube.
■Fast-loading pump head, the inlet and outlet end can be installed in any direction on the upper, down and side to meet the needs of different working conditions.
■Matching 12V/24V DC gear motor, stepper motor and other micro-motors.
■Small size, convenient installation and simple operation.
■ It is suitable for supporting various small instruments and equipment to meet the needs of micro-injection, flushing, and drainage.
Material
| školjka | PC |
| Valjček | PET |
Flow Rate Parameter
Material cevi：Silikon, Pharmed, PVC, Viton Wall thickness0.8-0.92mm
| ID（mm) | 0.25 | 0.5 | 1 | 1.52 | 2 | 2.4 | 3.2 | |
| ml/rpm | 0.002 | 0.014 | 0.037 | 0.1 | 0.148 | 0.23 | 0.36 | |
| ml/min (continuous working max100rpm) | 0.17 | 1.4 | 3.7 | 10 | 15 | 23 | 36 | |
| ml/min ( interval working max 400rpm) | 0.68 | 5.6 | 14.8 | 40 | 60 | 92 | 144 | |
★ Above flow parameters are obtained by using silicone tube to transfer pure water under normal temperature and pressure, in actually using it is effected by specific factors such as pressure, srednje itd. Zgoraj samo za referenco
Specifikacije
| Kanal | 1 |
| Valjček | 3 |
| Razpon pretoka | ≤144ml/min |
| Hitrost | continuous working ≤100rpm |
| interval working ≤400rpm(Please confirm with Lead Fluid engineer in advance) | |
| Metoda cevi | Tube connector built-in(ID ≥1.6mm) |
| Whole Tube | |
| Prilagoditev zračnosti | Fixed clearance |
| Motor | 12V/24V DC gear motor/stepper motor |
| Transmission pressure | ≤0.10MPa |
| Working temperature | 0~40 ℃ |
| Power | ＜10W |
Specifikacija motorja
| DC brush motor | Hitrost：35vrtljajev na minuto, 50vrtljajev na minuto, 100vrtljajev na minuto, 130vrtljajev na minuto, 178vrtljajev na minuto, 200vrtljajev na minuto, 320vrtljajev na minuto, 409vrtljajev na minuto |
| Voltage：DC12V/3W, DC24V/3W | |
| Natančnost hitrosti： ≤±10% | |
| Service life：1000 ure |
| DC brushless motor | Hitrost：45vrtljajev na minuto, 68vrtljajev na minuto, 120vrtljajev na minuto, 150vrtljajev na minuto, 250vrtljajev na minuto, 350vrtljajev na minuto |
| Voltage：DC12V/3W, DC24V/3W | |
| Hitrost ：≤±10% |
| 20 Stepper motor | Motor parameter: step angle 1.8° \ phase 2 \ phase voltage3.9V \ phase current 0.6A \phase resistance 6.5Ω±10% \ phase inductor 2.2mH±20% |
| Razpon hitrosti: ≤200rpm |
Dimenzija (DC gear motor）
Dimenzija (20 Stepper motor)
