Izdelek
Sorodni izdelki
KT15 Series ODM Peristaltic Pump
Kratek opis:
Razpon pretoka：
Največje število kanalov:
Pošljite nam e-pošto
■ Lead Fluid KT15 pump heads are suitable for ID0.8~6.4mm,wall thickness1.6mm Pharmed ,silicone tube,Viton etc., it can run continuously under in 100rpm and Max flow rate 255ml/min,interval running,M ax speed 250rpm, max flow rate 630ml/min.
■ KT15 pump head roller body using classic elastic fixed structure,can supply precision smooth flow range and excellent tube lifetime.
■ Pressure tube gap can be fine-tuned ,suitable for different wall thickness and output more pressure.
■ Pump head body using PPS materials,rollers body using PVDF materials,excellent mechanical properties and chemical resistance.
■ Pump head cover using translucent plastic,observing pump head internal working condition conveniently,effectively preventing exterior debris into pump head, open-cover shutdown function(izbirno).
■Installation tube has two types: connector built-in and spring tube clip,which is suitable for more working requirement.
■ Supply type 57 stepper motor,AC synchronous motor and AC/DC gear motor drive,panel and bottom board fixed method ,it is suitable for using variable small and medium-sized instruments and equipments.
Material glave črpalke
| Valjček | PVDF( Polyvinylidene Fluoride ) |
| Body | PPS (Polyphenylene sulfide ) |
| Pump head cover | PC (Polycarbonate ) |
| Spring | SS304（304 Stainless steel ） |
| Tube clip | PVDF( Polyvinylidene Fluoride ) |
| Tube connector | PP(Polypropylene )\PTFE(PTFE ) |
KT15 Pump Head Flow Range Parameters
Material cevi silikon,Pharmed,viton Tube wall thickness 1.6mm
| ID (mm) | 0.8 | 1 .6 | 2.4 | 3. 1 | 4.8 | 6.4 |
| 13# | 14# | 19# | 16# | 25# | 17# | |
| Milliliter/Revolution | 0.06 | 0.24 | 0.45 | 0.6 | 1.65 | 2.55 |
| mL/MIN(continuous working maximum 100rpm) | 4 | 24 | 45 | 60 | 165 | *255 |
| mL/MIN(interval working maximum 250rpm) | 15 | 60 | 112 | 150 | *412 | *630 |
★Above flow parameters are obtained by using silicone tube to transfer pure water under normal temperature and pressure, na dejansko uporabo vplivajo posebni dejavniki, kot je pritisk, mediumetc. Zgoraj samo za referenco.
Pump Head Specifications
| Kanal | 1 |
| Valjček | 2 |
| Metoda namestitve cevi | the whole tube connector （ ID≥1.0mm ） |
| Odmik tlačne cevi | fine-tune |
| Neto teža | 150g |
| Motor | stepper motor / AC motor / DC gear motor / AC gear motor |
Motor specifications
Stepper motor
step angle 1.8° \ phase 2 \ phase voltage 3.9V \ phase current 3A \ phase resistance 1.3Ω±20% \ phase inductor 5.0mH±20% \insulation resistance ≥100MΩ \ wring definition red line -A ,zelena črta -C ,rumena črta -B ,modra črta -D
60 DC gear motor
speed range :15vrtljajev na minuto ,30vrtljajev na minuto , 60vrtljajev na minuto ,100vrtljajev na minuto (other speeds can be customized)
voltage :DC12V/15W , DC24V/15W
60 AC gear motor
speed range: 15vrtljajev na minuto ,30vrtljajev na minuto ,60vrtljajev na minuto ,100vrtljajev na minuto (other speeds can be customized)
voltage: AC220V/10W
AC synchronous motor
speed range:2.5vrtljajev na minuto ,7.5vrtljajev na minuto ,20vrtljajev na minuto ,30vrtljajev na minuto , 60vrtljajev na minuto (other speeds can be customized)
voltage ：AC220V/8W
Stepper Motor Dimensions
AC Synchronized Motor Dimensions
DC/AC Gear Motor Dimensions
