Продукт
KD10 Series ODM Peristaltic Pump
Краткое описание:
Диапазон расхода: 0.0004~96mL/min
Максимальное количество каналов: 8
Отправьте нам электронное письмо
■ Lead Fluid KD10 series peristaltic pump flow range 0.0004~96ml/ min,multiple KD10 pump head can be up to 4-8 каналы,flexible combination.
■ Parts adopt PVDF material ,with excellent chemical corrosion resistance.
■ 4 rollers and specially designed pressure tube structure make the liquid transfer more stable and lower pulsation.
■ Elastic pressure tube device provides accurate, smooth flow and excellent tube life.
■ Exquisite and beautiful appearance, compact structure, only small installation space required.
■ Matching high-quality steeper motor is an ideal choice precise dosing and discharging liquid to satisfied a wide range of instruments requirement.
Pump Head Flow Rate Parameters KD10\KD10-2
Материал трубки: Силикон, Фармед,Витон,Тайгон 3603 wall thickness 0.8~1mm
ИДЕНТИФИКАТОР(мм) | 0.25 | 0.5 | 1 | 2 | 2.79 | 3.17 |
mL/Revolution | 0.004 | 0.018 | 0.058 | 0.16 | 0.38 | 0.48 |
Ml/min (Continuous working max100rpm) | 0.4 | 1.8 | 5.8 | 16 | 38 | 48 |
Ml/min (Interval working max200rpm) | 0.8 | 3.6 | 11.6 | 32 | 76 | 96 |
★ Above parameters are obtained by using silicone tube to transfer pure water under normal temperature and pressure, на фактическое использование на него влияют определенные факторы, такие как давление ,середина. Выше только для справки.
Pump Head Specifications
каналы: KD10-1 1 канал(maximum extensible to 4 каналы) KD10-2 2 каналы(maximum extensible to 2 каналы)
Ролик: 4
Метод установки трубки: Whole(Tube Stopper Fixed)/ built-in connector(tube ID≥1.0mm)
Output pressure: ≤0.1Mpa
Net weight: 120г
Мотор: шаговый двигатель(42 type,57type)
Motor Specifications
42 type stepper motor
pump head: KD10-1, KD10-2
об/мин: 0.1-100об/мин
step angle1.8° \ phase2 \phase voltage6.44V \ phase current 0.7A \ phase resistance9.2Ω±10% \phase inductor16mH±20%
57 type stepper motor
pump head: KD10-1 (cascadable 1 to 4), KD10-2(cascadable 1 к 4,speed<200rpm)
об/мин: 0.1-400об/мин
step angle 1.8° \ phase 2 \phase voltage3.9V \ phase current 3A \ phase resistance1.3Ω±10% \ phase inductor 5mH±20%
Измерение (42 type stepper motor)
Измерение (57 type stepper motor)
Tube Lifetime Comparision Table
Important tips
A.For longer tube life, choose thicker wall tube and low speed.
B.For larger flow,choose larger ID tube and in high speed.
C.For higher precision, choose smaller ID tube and medium to high speed
D.For higher suction and back pressure,choose thinner ID and thicker walltube and low speed.
Заявление: The finalexplanation right of aboveinformation belongs to Lead Fluid.