Продукт
DH10 Series ODM Peristaltic Pump
Краткое описание:
Диапазон расхода: ≤13.9mL/min
Максимальное количество каналов: 4
Отправьте нам электронное письмо
■ Lead Fluid DH10 series pump head single channel flow up to13.9 mL/min,suitable for wall thickness 0.8~1mm, ID 0.13~3.2mm Silicone, Фармед, PVC etc. material tube.
■ 12 rollers design makes the transmission pulse smaller and higher accuracy.
■ 1-4 channels are optional, and the pressure tube clearance of multiple channels can be individually adjusted, and the flow accuracy ± 1%.
■ Adopts Spring-Loading structure , the appropriate output pressure is obtained by adjusting the spring pressure system, the service life of tube is greatly prolonged.
■ The machine is made of super strong materials with good mechanical properties,high temperature and chemical resistance, compact and beautiful appearance.
■ Matching stepper motor, suitable for all kinds of precision analytical instruments.
Материал головки насоса
Base, Bracket | Алюминиевый сплав |
Роликовый вал | СС304 |
Ролик, press block | PEI |
Flow Rate Parameter
Материал трубки:Силикон, Фармед, ПВХ
Wall thickness 0.86~1mm
ID(mm) | 0.25 | 1 | 1.52 | 2 | 2.4 | 3. 2 |
мл/об/мин | 0.0038 | 0.043 | 0.06 | 0.09 | 0.139 | 0.13 |
мл/мин (continuous working max100rpm) | 0.38 | 4.3 | 6 | 9 | 13.9 | 13 |
★ Above flow parameters are obtained by transferring pure water under normal temperature and pressure, in actually using it is effected by specific factors such as pressure, средний и т. д.. Выше только для справки.
Specification
Диапазон расхода: ≤13.9ml/min
Spedd range :0.1~100 об/мин
Размер трубки :Wall thickness 0.8~1mm, ID 0.13~3.2mm
Канал: 1~4
Ролик :12
Зазор напорной трубки: Adjustable spring
Мотор: 57 шаговый двигатель
Transmission pressure: ≤0.1MPa
Рабочая обстановка: Температура 0~40℃,влажность<80%
Измерение: 121X85X92mm(4 Channels)
Motor Speicification
57 шаговый двигатель
step angle 1.8° \ phase2 \ phase voltage3.9V \ phase current3A \ phase resistance1.3Ω±20% \phase inductor 5.0mH±20%
Insulation class : 1≥100MΩ
Wiring definition: red line-A, green line-C , yellow line-B, blue line-D
Измерение (4 каналы)
Tube Life Comparison Table
Important tips:
A.For longer tube life, choose thicker wall tube and low speed.
B.For larger flow,choose larger ID tube and in high speed.
C.For higher precision, choose smaller ID tube and medium to high speed.
D.For higher suction and back pressure,choose thinner ID and thicker wall tube and low speed Statement:Право на окончательное объяснение приведенной выше информации принадлежит компании Lead Fluid..