Lead Fluid laboratory syringe pumps are widely used in microfluidics, high-voltage electrospinning, fine chemicals, petroleum, biopharmaceuticals, mediu inconjurator, and scientific research institutes and other fields.
With the increasing application of flow chemistry, the conditions of the reaction system are becoming more and more complicated, and the types of materials to be conveyed are becoming more and more. When using traditional high pressure constant flow pumps, due to the particularity of its structure, the inlet and outlet check valves are often contaminated , can not work normally, resulting in unstable and inaccurate feed flow. În același timp, when encountering viscous corrosive liquid materials, the one-way valve is difficult to close smoothly and loses its function, which seriously restricts the transportation of viscous materials. In order to adapt to the rapid development of flow chemistry applications, expand the scope of application, and transport various types of raw materials, in order for customers to use more professional and convenient equipment, save time, material resources, and manpower, Lead Fluid has launched a new high-pressure syringe pump.
Product introduction:
Lead Fluid officially released a new precision high-pressure syringe pump—TGD01 today. The high-pressure syringe pump can hold a syringe (gas tight syringe) of 0.5μl~140ml specifications. The super large thrust is suitable for the transmission of viscous liquids, chemical reactor experiments, medicine and chemical engineering. And other industries.
Lead Fluid TGD01 is a single-channel high-pressure syringe pump with high-definition LCD touch screen operation. It transmits more than 200lbs (91kg)linear thrust in a wide range of flow rates and supports five working modes such as infuse and withdraw. Comunicare RS485, support Modbus protocol, wide range power input, suitable for high-precision transmission of liquids (including high viscosity).
Main feature:
• Accurate and smooth flow rate
• Can be loaded with a stainless steel syringe for high pressure or viscous liquid transmission
• The accuracy and stability of liquid injection
• Power-down memory function
• Simple to complex programming operations can be performed without a computer
Common applications:
• High thrust injection
• Highly corrosive liquid injection
• High viscosity liquid injection
• Micro high precision injection
• Inject into high pressure container
TGD01 suitable for 0.5ul-140ml syringe, linear speed 1μm/min～190mm/min
Parametru tehnic
• Dimensiunea seringii: 0.5μl～140ml
• Domeniul debitului: 3.06pl/min（0.5μl syringe）～215ml/min（140ml syringe）
• Work mode infuse, retrage, infuza/retrage, retrage/infuza, modul continuu
• Canal: 1
• Cursa pompei: 140mm
• Pusher advance per microstep: 0.156μm/μpas
• Viteza liniară: 1μm/min～190mm/min
• Linear travel accuracy: error＜±0.35% (＞30% of pump stroke)
• Max thrust: 91kg（100% thrust）
• Reglarea tracţiunii : 1%～100% reglabil arbitrar
• Selectarea seringilor: încorporați principalii producători, modelul principal de seringă de ales; Se poate folosi o seringă personalizată,dimensiunea și diametrul seringii cu intrare directă
• Calibrarea debitului: prin procedura de calibrare pentru a obține un volum de fluid mai precis
• Afișaj: 4.3-inch color LCD with screen display and transfusion volume, volumul de lichid rezidual, curgere ,direcția de funcționare ,specificația seringii, etc. Starea de funcționare a afișajului animației
• Operation mode touch screen and button
• Memorie de oprire: memorarea automată a parametrilor de rulare
• Interfață de comunicare: RS485, Modbus Protocol
• External control: External signal control start and stop, status signal output
• Alimentare electrică: AC100-240V，50-60Hz
• Work environment: temperature 5～40℃，Relative humidity<80%
• Dimension: 305×222×190( mm)
• Grad IP: IP31
• Material de coajă: sheet metal spray
• Greutate: 6.6kg