Produs
MM10 Series ODM Peristaltic Pump
scurta descriere:
Domeniul debitului：≤144ml/min
Număr maxim de canale：1
Trimiteți-ne un e-mail
■Lead Fluid MM10 pump head suitable for wall thickness 0.8-0.92mm, ID 0.13-3.2mm Silicone, Pharmed, PVC, Viton etc. material tube, it can run continuously at the max flow rate 36 ml/min at 100 rpm, and interval operation the max speed can reach 400 rpm and the flow rate can reach 144ml/min.
■The pump head is made of high-performance plastic material, with high rigidity and strength, and excellent wear resistance.
■The pump head adopts a unique rotary card design. Poate fi dezasamblat și asamblat fără unelte. Este ușor să înlocuiți tubul pompei și să curățați și să întrețineți. Există două moduri de a instala tubul, unul este conectorul tubului încorporat, iar celălalt este pentru a instala întregul tub.
■Fast-loading pump head, the inlet and outlet end can be installed in any direction on the upper, down and side to meet the needs of different working conditions.
■Matching 12V/24V DC gear motor, stepper motor and other micro-motors.
■Small size, instalare convenabilă și operare simplă.
■ It is suitable for supporting various small instruments and equipment to meet the needs of micro-injection, înroșirea, si drenaj.
Material
| Shell | PC |
| Rolă | PET |
Flow Rate Parameter
Tube material：Silicone, Pharmed, PVC, Viton Wall thickness0.8-0.92mm
| ID（mm) | 0.25 | 0.5 | 1 | 1.52 | 2 | 2.4 | 3.2 | |
| mL/rpm | 0.002 | 0.014 | 0.037 | 0.1 | 0.148 | 0.23 | 0.36 | |
| ml/min (continuous working max100rpm) | 0.17 | 1.4 | 3.7 | 10 | 15 | 23 | 36 | |
| ml/min ( interval working max 400rpm) | 0.68 | 5.6 | 14.8 | 40 | 60 | 92 | 144 | |
★ Above flow parameters are obtained by using silicone tube to transfer pure water under normal temperature and pressure, in actually using it is effected by specific factors such as pressure, mediu etc. Mai sus doar pentru referință
Specificații
| Canal | 1 |
| Rolă | 3 |
| Domeniul debitului | ≤144ml/min |
| Viteză | continuous working ≤100rpm |
| interval working ≤400rpm(Please confirm with Lead Fluid engineer in advance) | |
| Tubing method | Tube connector built-in(ID ≥1.6mm) |
| Whole Tube | |
| Clearance adjustment | Fixed clearance |
| Motor | 12V/24V DC gear motor/stepper motor |
| Transmission pressure | ≤0.10MPa |
| Working temperature | 0~40℃ |
| Putere | ＜10W |
Motor Specification
| DC brush motor | Viteză：35rpm, 50rpm, 100rpm, 130rpm, 178rpm, 200rpm, 320rpm, 409rpm |
| Voltage：DC12V/3W, DC24V/3W | |
| Precizia vitezei： ≤±10% | |
| Service life：1000 ore |
| DC brushless motor | Viteză：45rpm, 68rpm, 120rpm, 150rpm, 250rpm, 350rpm |
| Voltage：DC12V/3W, DC24V/3W | |
| Viteză ：≤±10% |
| 20 Stepper motor | Motor parameter: step angle 1.8° \ phase 2 \ phase voltage3.9V \ phase current 0.6A \phase resistance 6.5Ω±10% \ phase inductor 2.2mH±20% |
| Gama de viteze: ≤200rpm |
Dimensiune (DC gear motor）
Dimensiune (20 Stepper motor)
