Produs
Funcție și caracteristică
■ Lead Fluid industrial micro syringe pump G6060-1S mainly suitable for high-precision micro liquid of continuous transmission, dilution and dispensing.
■ Rated stroke 60mm, standard mode 6000 steps,microstep mode up to 48000 steps.
■ Stepper motor, backlash compensation screw assembly drive, mechanical reversal with extremely high transmission stability and accuracy.
■ Can assembly a 50ul-25ml gas tight syringe, and the linear velocity range is wider.
■ The material of the valve body and the fluid path has excellent chemical properties, adapting to various neutral and corrosive solutions.
■ It can be used in various ways, it can be controlled by external signal, it can also be controlled by PC communication or it can run automatically offline.
Schematic diagram(Three-port valve)
Components
SPECIFICAȚIE
Parametru tehnic
Viteza liniară | 0.01mm/s~50mm/s |
Running time | 1.2 s~100 min(Rated stroke) |
Flow accuracy | error≤1%(Rated stroke) |
Flow repeatability | CV≤0.05%(Rated stroke,25℃ Deionized water,1ml and above syringe) |
Alimentare electrică | DC 24V/2.0A |
Syringe | 50μl/100μl/250μl/500μl/1ml/2.5ml/5ml/10ml/25ml |
Rated stroke | 60mm |
Control resolution | standard mode 6000 steps,microstep mode 48000 steps(rated stroke) |
Syringe fitting | 1/4-28UNF inner thread |
Syringe material | Borosilicate glass syringe, stainless steel push rod, PTFE piston |
Piston drive | Stepper motor,Backlash compensation screw assembly drive, orthogonal encoding to detect position |
Reversing valve | standard:120°3 port |
Valve position time | ≤250 millisecond(Between two adjacent valves) |
Valve material | PTFE, PCTFE |
Valve fitting | 1/4-28UNF inner thread |
Signal input | 2 gates TTL Level signal input (drive current>16mA) |
Signal output | 3 gates TTL level signal outpump |
Communication | RS485/RS232 |
Protocol | DT protocol, ODM protocol |
Bit rate | 9600bps/38400bps can set |
Parameter setting | 7 digit dial switch |
Chain communication | Supports up to 15 pump communication, no converter is needed to realize the conversion of RS232 and RS485 |
Firmware upgrade | Upgrade via computer RS232 interface |
Programming function | Ramp, cut-off speed, gap compensation, injection speed, ciclu,Real-time termination of movement and delay, error detection, valve rotation selection, storage of 15 groups of operating modes |
Mediu de lucru | temperature 15℃~40℃,umiditate relativa <80% |
Storage envirionment | -20℃~65℃ |
Dimensiune | 114×65×254mm(L×L×A) |
Greutate | 2.1kg |
Syringe
Syringe | 50μl | 100μl | 250μl | 500μl | 1ml | 5ml | 10ml | 25ml |
Min Flow (ml/min) | 0.0003125 | 0.000625 | 0.001563 | 0.003125 | 0.00625 | 0.03125 | 0.0625 | 0.15625 |
Debit maxim (ml/min) | 2.5 | 5.0 | 12.5 | 25 | 50 | 250.0 | 500.0 | 1250.0 |
Parametrii de debit de mai sus sunt obținuți prin utilizarea tubului de silicon pentru a transfera apă pură la temperatură și presiune normale, utilizarea efectivă a acestuia este influențată de factori specifici, cum ar fi presiunea, mediu etc. Mai sus doar pentru referință.
Connector and Pipeline
Thread inverted taper joint
Specificație | 1/4-28UNF |
Material | PTFE |
Transmission line
Specificație | 0.5×1,6 mm | 1.0×1,6 mm | 1.6×3.2mm |
Material | PTFE |
Dimensiune
UN:mm