produtos
MM10 Series ODM Peristaltic Pump
Pequena descrição:
Faixa de fluxo:≤144ml/min
Número máximo de canais:1
Envie um e-mail para nós
■Lead Fluid MM10 pump head suitable for wall thickness 0.8-0.92mm, ID 0.13-3.2mm Silicone, Pharmed, PVC, Viton etc. material tube, it can run continuously at the max flow rate 36 ml/min at 100 rpm, and interval operation the max speed can reach 400 rpm and the flow rate can reach 144ml/min.
■The pump head is made of high-performance plastic material, with high rigidity and strength, and excellent wear resistance.
■The pump head adopts a unique rotary card design. Pode ser desmontado e montado sem ferramentas. É fácil substituir o tubo da bomba e limpar e manter. Existem duas maneiras de instalar o tubo, um é o conector do tubo embutido e o outro é para instalar o tubo inteiro.
■Fast-loading pump head, the inlet and outlet end can be installed in any direction on the upper, down and side to meet the needs of different working conditions.
■Matching 12V/24V DC gear motor, stepper motor and other micro-motors.
■Small size, instalação conveniente e operação simples.
■ It is suitable for supporting various small instruments and equipment to meet the needs of micro-injection, lavagem, e drenagem.
Material
Shell | PC |
Rolo | PET |
Flow Rate Parameter
Tube material:Silicone, Pharmed, PVC, Viton Wall thickness0.8-0.92mm
ID(mm) | 0.25 | 0.5 | 1 | 1.52 | 2 | 2.4 | 3.2 | |
mL/rpm | 0.002 | 0.014 | 0.037 | 0.1 | 0.148 | 0.23 | 0.36 | |
mL/min (continuous working max100rpm) | 0.17 | 1.4 | 3.7 | 10 | 15 | 23 | 36 | |
mL/min ( interval working max 400rpm) | 0.68 | 5.6 | 14.8 | 40 | 60 | 92 | 144 |
★ Above flow parameters are obtained by using silicone tube to transfer pure water under normal temperature and pressure, in actually using it is effected by specific factors such as pressure, médio etc.. Acima apenas para referência
Especificações
Canal | 1 |
Rolo | 3 |
Faixa de fluxo | ≤144ml/min |
Velocidade | continuous working ≤100rpm |
interval working ≤400rpm(Please confirm with Lead Fluid engineer in advance) | |
Tubing method | Tube connector built-in(ID ≥1.6mm) |
Whole Tube | |
Clearance adjustment | Fixed clearance |
Motor | 12V/24V DC gear motor/stepper motor |
Transmission pressure | ≤0.10MPa |
Working temperature | 0~40℃ |
Power | <10W |
Motor Specification
DC brush motor | Velocidade:35rpm, 50rpm, 100rpm, 130rpm, 178rpm, 200rpm, 320rpm, 409rpm |
Voltage:DC12V/3W, DC24V/3W | |
Precisão de velocidade: ≤±10% | |
Service life:1000 horas |
DC brushless motor | Velocidade:45rpm, 68rpm, 120rpm, 150rpm, 250rpm, 350rpm |
Voltage:DC12V/3W, DC24V/3W | |
Velocidade :≤±10% |
20 Stepper motor | Motor parameter: step angle 1.8° \ phase 2 \ phase voltage3.9V \ phase current 0.6A \phase resistance 6.5Ω±10% \ phase inductor 2.2mH±20% |
Faixa de velocidade: ≤200rpm |
Dimensão (DC gear motor)
Dimensão (20 Stepper motor)