Produkt
KD10 Series ODM Peristaltic Pump
krótki opis:
Zakres przepływu: 0.0004~96mL/min
Maksymalna liczba kanałów: 8
Wyślij e-mail do nas
■ Lead Fluid KD10 series peristaltic pump flow range 0.0004~96ml/ min,multiple KD10 pump head can be up to 4-8 kanały,flexible combination.
■ Parts adopt PVDF material ，with excellent chemical corrosion resistance.
■ 4 rollers and specially designed pressure tube structure make the liquid transfer more stable and lower pulsation.
■ Elastic pressure tube device provides accurate, smooth flow and excellent tube life.
■ Exquisite and beautiful appearance, compact structure, only small installation space required.
■ Matching high-quality steeper motor is an ideal choice precise dosing and discharging liquid to satisfied a wide range of instruments requirement.
Pump Head Flow Rate Parameters KD10\KD10-2
Materiał rurkowy: Silikon, Apteka,Viton,Tygon 3603 Grubość ściany 0,8 ~ 1 mm
| ID(mm) | 0.25 | 0.5 | 1 | 2 | 2.79 | 3.17 |
| mL/Revolution | 0.004 | 0.018 | 0.058 | 0.16 | 0.38 | 0.48 |
| Ml/min (Continuous working max100rpm) | 0.4 | 1.8 | 5.8 | 16 | 38 | 48 |
| Ml/min (Interval working max200rpm) | 0.8 | 3.6 | 11.6 | 32 | 76 | 96 |
★ Above parameters are obtained by using silicone tube to transfer pure water under normal temperature and pressure, na faktyczne jego użycie wpływają określone czynniki, takie jak ciśnienie ,średni. Powyżej wyłącznie w celach informacyjnych.
Specyfikacje głowicy pompy
Kanały: KD10-1 1 kanał(maximum extensible to 4 kanały) KD10-2 2 kanały(maximum extensible to 2 kanały)
Wałek: 4
Installation tube method: Whole(Tube Stopper Fixed)/ built-in connector(tube ID≥1.0mm)
Output pressure: ≤0.1Mpa
Waga netto: 120g
Silnik: Steppes Motor(42 type,57type)
Specyfikacje motoryczne
42 type stepper motor
pump head: KD10-1, KD10-2
RPM: 0.1-100obr./min
step angle1.8° \ phase2 \phase voltage6.44V \ phase current 0.7A \ phase resistance9.2Ω±10% \phase inductor16mH±20%
57 type stepper motor
pump head: KD10-1 (cascadable 1 to 4）, KD10-2(cascadable 1 to 4，speed＜200rpm）
RPM: 0.1-400obr./min
Kąt krok 1,8 ° \ faza 2 \Napięcie fazowe3,9 V. \ phase current 3A \ phase resistance1.3Ω±10% \ phase inductor 5mH±20%
Wymiar (42 type stepper motor)
Wymiar (57 type stepper motor)
Tube Lifetime Comparision Table
Important tips
A.For longer tube life, choose thicker wall tube and low speed.
B.For larger flow,choose larger ID tube and in high speed.
C.For higher precision, choose smaller ID tube and medium to high speed
D.For higher suction and back pressure,choose thinner ID and thicker walltube and low speed.
Oświadczenie: The finalexplanation right of aboveinformation belongs to Lead Fluid.
