Өнім
Қосымша тауарлар
Manufactur Standard Dispensing Peristaltic Pump Wsp Peristaltic Pump Lead Fluid Product
Қысқаша сипаттама:
We normally follow the basic principle “Quality Initial, Prestige Supreme”. We’ve been fully committed to offering our consumers with competitively priced good quality merchandise, prompt delivery and professional support for Syringe Pump Pressure, Diy Peristaltic Pump, Перистальтикалық сорғы контроллері, We guaranteed quality, if customers were not satisfied with the products’ сапасы, you can return within 7days with their original states.
Бізге электрондық поштаны жіберіңіз
WSP Peristaltic Pump
Filling range: 1μl~3000μl
Filling accuracy: 10μl±0.1, 50μl±0.2, 100μl±0.5, 500μl±4, 1000μl±8, 3000μl±13
Арна: 1 (Single), up to 16 channels cascade are supported
Filling time: 0.1~99.99S
Lead Fluid WSP3000 series products are mainly used for high-precision filling of various aqueous solutions, filling range 1μl~3000μl, It has the advantages of high accuracy, high repeatability, жоғары тиімділік, high cleanliness, maintenance friendly and simple operation. It can be used manually and automatically.
Typical Application
• Immunodiagnosis • Biochemical diagnosis • Microbial Detection • Tumor markers • Gene Sequencing • Proteomics
High-precision dispensing of related reagents
Сипаттама
• High filling accuracy, қате ±0,2%-дан аз
• Modular design, кеңейту оңай, көп арналы толтыру жүйесін қалыптастыру үшін бірнеше сорғыларды каскадтауға болады
• The man-machine interface directly input liquid volume parameters, жұмыс істеу оңай
• High precision servo motor drive, үлкен момент, тегін техникалық қызмет көрсету
• Rotary pressure tube structure, жоғары тиімділік
• The pump tube is low in loss, дейін үздіксіз қызмет ету мерзімі 1000 сағат, 12 сағаттық әлсіреу жылдамдығы＜1%
• Suction back function,нөлдік тамшы,лезде өшіру
• High clean pipeline, бөлшектеуге оңай, тазалау және зарарсыздандыру оңай, CIP және SIP қолдауы
• The pipeline is not easy to be blocked, және ол тұндыру оңай және магниттік моншақтар сияқты белгілі бір тұтқырлығы бар материалдарды оңай жеңе алады., глицерин, т.б.
• It can be operated manually or used with an automatic production line.
Техникалық параметрлер
| Filling Range | 1 ul~3000 ul |
| Accuracy | 10μl±0.1, 50μl±0.2, 100μl±0.5, 500μl±4, 1000μl±8, 3000μl±13 |
| Арна | 1(Single) ,up to 16 channels cascade are supported |
| Filling Time | 0.01~99.99S |
| Interval Time | 0.4~99.99S |
| Filling Times | 0(Infinite loop) ~9999 |
| Түтік | ID 0.5~6.4mm |
| Display | 7 inch HD color touch screen |
| External Control Signal | Dry contact start signal, lack of bottle filling stop signal, feedback signal |
| Communication | RS485, MODBUS commnunication protocol |
| Қуат | Single channel<30В |
| Power Supply | AC100~240V, 50/60Hz |
Feature Comparision
Compared with Traditional Peristaltic Pump
| WSP Peristaltic Pump | Traditional Peristaltic Pump | |
| Filling Accuracy | high accuracy,high repeatability, filling 10μl error<±0.1μl, 100μl error<±0.5μl | don’t suitable for filling less than 100 ul,200μl error<±3μl |
| Filling Efficiency | жоғары тиімділік, productivity up to 120 bottles/min | average efficiency, productivity＜40 bottles/min |
| Attenuation | 12 hours continuous operation, attenuatio＜1%, work one day without calibration | 12 hours continuous operation, attentuation＞5%, need to calibrate every 2 сағат |
| Tube Life | continuous operation, service life＞1000 hours | fail after 70-100 hours of continuous operation |
| Pulsation | no pulse, small impact, no splash | large pulse, easy to splash |
Compared with Plunger Pump
| WSP Peristaltic Pump | Plunger Pump | |
| Cleanliness | no dead volume,no effusion,material only contact with clean pipeline,no pollution | dead volume, effusion,material contact with the pump head cavity, clean not thoroughly |
| Ease of Use | filling different material,only replace the pipeline to avoid cross contamination, low cost,simple maintenance | One pump can only fill one material, complicated maintenance |
| Universality | the material may contain particles such as magnetic beads | material must be clean and free of impurities |
| Filling range | 1μl~3000μl replace the pump tube | adjustable range＜5 times |
| Dripping | retractable without dripping | easy to drip |
| Cavity Shedding | low extrusion strength,no mechanical friction,smooth cavity wall without shedding | continuous mechanical friction,the cavity is easy to fall off particles |
Filling Accuracy and Efficiency
WSP3000
|
Filling Range |
Filling Time |
Error Value |
Accuracy Error |
12 Hours Attenuation Rate |
|
1μl |
0.01~0.02 |
±0.1μL |
<±10% |
<1% |
|
5μl |
0.04~0.12 |
±0.1μL |
<±2% |
|
|
10μl |
0.09~0.23 |
±0.1μL |
<±1% |
|
|
20μl |
0.18~0.46 |
±0.1μL |
<±0.5% |
|
|
0.1~0.24 |
±0.2μL |
<±1% |
||
|
50μl |
0.25~0.6 |
±0.2μL |
<±0.4% |
|
|
0.08~0.2 |
±0.5μL |
<±1% |
||
|
100μl |
0.16~0.4 |
±0.5μL |
<±0.5% |
|
|
0.13~0.3 |
1μL |
<±1% |
||
|
200μl |
0.26~0.6 |
±1μL |
<±0.5% |
|
|
0.1~0.25 |
±2μL |
<±1% |
||
|
300μl |
0.15~0.35 |
±2μL |
<±0.6% |
|
|
0.1~0.22 |
±4μL |
<±1.6% |
||
|
500μl |
0.25~0.6 |
±2μL |
<±0.4% |
|
|
0.16~0.35 |
±4μL |
<±0.8% |
||
|
800μl |
0.11~0.23 |
±8μL |
<±1% |
|
|
1000μl |
0.13~0.26 |
±8μL |
<±0.8% |
|
|
0.08~0.17 |
±13μL |
<±1.3% |
||
|
3000μl |
0.25~0.5 |
±13μL |
<±0.6% |
