Produk
TFD04 Split Style Syringe Pump
Deskripsi Singkat:
Rentang aliran:
Max number of channel: 8
Kirim Email Kepada Kami
Perkenalan
Lead Fluid TFD04 laboratory syringe pump, transmission accuracy error＜±0.5%, can independently control 1～8 channel operation. Split design, more flexible usage. 7-inch HD color touch screen display and operation, fungsi yang kuat, operasi sederhana, rich operating information. RS485 communication, support MODBUS protocol.
Fitur
• Can independently control 1～8 channel operation.
• 7-inch HD color touch screen display and operation, bringing a good user experience.
• LF-Touch-OS software system, friendly interface, reliable operation.
• Accurate flow control, transmission accuracy error＜±0.5%.
• Intelligent flow correction function.
• Four working modes：only infuse, only withdraw, infuse/withdraw, withdraw/infuse.
• With fast filling and emptying function.
• Support start delay and cyclic operation.
• Save five groups of formula parameters.
• RS485 communication, MODBUS protocol, support the setting of communication parameters, convenient to connect with various control device.
• External control signal controls start, stop, pause, and physical isolation.
• Super anti-interference characteristics, wide voltage design, suitable for complex power supply environment
• High-strength metal case with protective coating, corrosion-resistant and easy to clean.
• The internal circuit is treated with special protection to prevent dust, moisture and static electricity.
Parameter Teknis
| Saluran | 1～8 channels，independently control |
| Syringe size | 0.5μL～60mL（replace the execution unit） |
| Syringe selection | built-in mainstream brand syringe specifications, support customization |
| Working mode | infuse, withdraw ,infuse/withdraw, withdraw/infuse |
| Accuracy | error＜±0.5%（＞30% of pump stroke） |
| Flow calibration | intelligent guide |
| Display | 7 inch 65565 color LCD |
| Operation method | Touch screen |
| Delay time | 0.1～999 s/min/h |
| Cycles | 0～9999 |
| Cycles interval time | 0.1～999 s/min/h |
| Power-down memory | Memorize parameters set before power off |
| Status signal output | 5V TTL，1 road indicates running status, 1 road indicates direction status |
| Control signal input | 5～24V Wide voltage, control start, stop and pause |
| Communication | RS485，support Modbus protocol |
| Catu daya | AC100～240V，50Hz/60Hz |
| Konsumsi daya | Controller 40W+30W (each execution unit) |
| Environment | temperature5～40℃ ，kelembaban relatif＜80% |
| Controller dimension | 200×142×88mm |
| Controller weight | 2.0kg |
| Execution Unit |  |
||
| ZX01 | ZX02 | ZX03 | |
| Syringe | 5μL～1000μL | 10μL～60mL | 0.5μL～100μL |
| Rentang aliran | 0.058nL/min～1.587mL/min | 0.184nL/min～83.318mL/min | 0.005nL/min～152.456μL/min |
| Saluran | 1～8 | 1～4 | 1～8 |
| Max stroke of pump | 70mm | 110mm | 70mm |
| Max rated thrust | >2kgf，Adjustable thrust | >10kgf，Adjustable thrust | >1kgf，Adjustable thrust |
| Advance per microstep | 0.198μm/μstep | 0.156μm/μstep | 0.1905μm/μstep |
| Linear speed | 0.635μm/min～95.25mm/min | 1μm/min～150mm/min | 0.6096μm/min～91.44mm/min |
| Execution unit dimension | 195×43.5×70mm | 266×86×76mm | |
| Execution unit weight | 0.85 kg | 1.8 kg | 0.25 kg |
Reference Table of Syringe Specifications and Flow Rate
ZX02
| Syringe size | Syringe ID (mm) | Min flow rate (nl/min) | Max flow rate (ml/min) |
| 10μl | 0.485 | 0.184 | 0.027 |
| 25μl | 0.729 | 0.417 | 0.0626 |
| 50μl | 1.03 | 0.833 | 0.125 |
| 100μl | 1.457 | 1.667 | 0.250 |
| 250μL | 2.304 | 4.169 | 0.625 |
| 500μL | 3.256 | 8.326 | 1.248 |
| 1mL | 4.699 | 17.342 | 2.601 |
| 5mL | 11.989 | 112.89 | 16.933 |
| 10mL | 14.427 | 163.469 | 24.520 |
| 20mL | 19.05 | 285.027 | 42.754 |
| 30mL | 21.59 | 366.090 | 54.913 |
| 60mL | 26.594 | 555.459 | 83.318 |
ZX03
| Syringe size | Syringe ID (mm) | Min flow rate (nl/min) | Max flow rate (μl/min) |
| 0.5μL | 0.103 | 0.005 | 0.761 |
| 1μL | 0.146 | 0.01 | 1.531 |
| 2μL | 0.206 | 0.020 | 3.047 |
| 5μL | 0.3257 | 0.051 | 7.618 |
| 10μl | 0.485 | 0.112 | 16.893 |
| 25μl | 0.729 | 0.254 | 38.166 |
| 50μl | 1.03 | 0.507 | 76.190 |
| 100μl | 1.457 | 1.016 | 152.456 |
Parameter aliran di atas diperoleh dengan menggunakan tabung silikon untuk mentransfer air murni pada suhu dan tekanan normal, dalam menggunakannya sebenarnya dipengaruhi oleh faktor-faktor tertentu seperti tekanan, sedang dll. Di atas hanya untuk referensi.
Dimensi
Execution Unit Dimension （UN：mm）
Controller Dimension （UN：mm）
Penyataan：Hak penjelasan terakhir atas informasi di atas adalah milik Lead Fluid.
