Produk
MM10 Series ODM Peristaltic Pump
Deskripsi Singkat:
Rentang aliran：≤144ml/min
Jumlah saluran maksimal：1
Kirim Email Kepada Kami
■Lead Fluid MM10 pump head suitable for wall thickness 0.8-0.92mm, ID 0.13-3.2mm Silicone, farmasi, PVC, Viton etc. material tube, it can run continuously at the max flow rate 36 ml/min at 100 rpm, and interval operation the max speed can reach 400 rpm and the flow rate can reach 144ml/min.
■The pump head is made of high-performance plastic material, with high rigidity and strength, and excellent wear resistance.
■The pump head adopts a unique rotary card design. It can be disassembled and assembled without tools. It is easy to replace the pump tube and clean up and maintain. There are two ways to install tube, one is tube connector built-in and the other is to install whole tube.
■Fast-loading pump head, the inlet and outlet end can be installed in any direction on the upper, down and side to meet the needs of different working conditions.
■Matching 12V/24V DC gear motor, stepper motor and other micro-motors.
■Small size, convenient installation and simple operation.
■ It is suitable for supporting various small instruments and equipment to meet the needs of micro-injection, flushing, and drainage.
Bahan
| Kerang | PC |
| Rol | PET |
Parameter Laju Aliran
Bahan tabung：Silikon, farmasi, PVC, Viton Wall thickness0.8-0.92mm
| ID（mm) | 0.25 | 0.5 | 1 | 1.52 | 2 | 2.4 | 3.2 | |
| mL/rpm | 0.002 | 0.014 | 0.037 | 0.1 | 0.148 | 0.23 | 0.36 | |
| mL/min (continuous working max100rpm) | 0.17 | 1.4 | 3.7 | 10 | 15 | 23 | 36 | |
| mL/min ( interval working max 400rpm) | 0.68 | 5.6 | 14.8 | 40 | 60 | 92 | 144 | |
★ Above flow parameters are obtained by using silicone tube to transfer pure water under normal temperature and pressure, in actually using it is effected by specific factors such as pressure, sedang dll. Di atas hanya untuk referensi
Spesifikasi
| Saluran | 1 |
| Rol | 3 |
| Rentang aliran | ≤144ml/min |
| Kecepatan | continuous working ≤100rpm |
| interval working ≤400rpm(Please confirm with Lead Fluid engineer in advance) | |
| Tubing method | Tube connector built-in(ID ≥1.6mm) |
| Whole Tube | |
| Clearance adjustment | Fixed clearance |
| Motor | 12V/24V DC gear motor/stepper motor |
| Transmission pressure | ≤0.10MPa |
| Working temperature | 0~40℃ |
| Kekuatan | ＜10W |
Spesifikasi Motor
| DC brush motor | Kecepatan：35rpm, 50rpm, 100rpm, 130rpm, 178rpm, 200rpm, 320rpm, 409rpm |
| Voltage：DC12V/3W, DC24V/3W | |
| Akurasi kecepatan： ≤±10% | |
| Kehidupan pelayanan：1000 jam |
| DC brushless motor | Kecepatan：45rpm, 68rpm, 120rpm, 150rpm, 250rpm, 350rpm |
| Voltage：DC12V/3W, DC24V/3W | |
| Kecepatan ：≤±10% |
| 20 motor stepper | Motor parameter: sudut langkah 1,8° \ fase 2 \ phase voltage3.9V \ phase current 0.6A \phase resistance 6.5Ω±10% \ phase inductor 2.2mH±20% |
| Rentang kecepatan: ≤200rpm |
Dimensi (DC gear motor）
Dimensi (20 motor stepper)
