Produk
Pompa Peristaltik ODM Seri KT15
Deskripsi Singkat:
Rentang aliran：
Jumlah saluran maksimal:
Kirim Email Kepada Kami
■ Lead Fluid KT15 pump heads are suitable for ID0.8~6.4mm,wall thickness1.6mm Pharmed ,silicone tube,Viton etc., it can run continuously under in 100rpm and Max flow rate 255ml/min,interval running,M ax speed 250rpm, max flow rate 630ml/min.
■ KT15 pump head roller body using classic elastic fixed structure,can supply precision smooth flow range and excellent tube lifetime.
■ Pressure tube gap can be fine-tuned ,suitable for different wall thickness and output more pressure.
■ Pump head body using PPS materials,rollers body using PVDF materials,excellent mechanical properties and chemical resistance.
■ Pump head cover using translucent plastic,observing pump head internal working condition conveniently,effectively preventing exterior debris into pump head, open-cover shutdown function(opsional).
■Installation tube has two types: connector built-in and spring tube clip,which is suitable for more working requirement.
■ Supply type 57 stepper motor,AC synchronous motor and AC/DC gear motor drive,panel and bottom board fixed method ,it is suitable for using variable small and medium-sized instruments and equipments.
Bahan Kepala Pompa
| Rol | PVDF( Polyvinylidene Fluoride ) |
| Body | PPS (Polyphenylene sulfide ) |
| Pump head cover | PC (Polycarbonate ) |
| Spring | SS304（304 Stainless steel ） |
| Tube clip | PVDF( Polyvinylidene Fluoride ) |
| Konektor tabung | PP(Polypropylene )\PTFE(PTFE ) |
KT15 Pump Head Flow Range Parameters
Tube material silicone,pharmed,viton Tube wall thickness 1.6mm
| ID (mm) | 0.8 | 1 .6 | 2.4 | 3. 1 | 4.8 | 6.4 |
| 13# | 14# | 19# | 16# | 25# | 17# | |
| Mililiter/Revolusi | 0.06 | 0.24 | 0.45 | 0.6 | 1.65 | 2.55 |
| mL/MIN(continuous working maximum 100rpm) | 4 | 24 | 45 | 60 | 165 | *255 |
| mL/MIN(interval working maximum 250rpm) | 15 | 60 | 112 | 150 | *412 | *630 |
★Above flow parameters are obtained by using silicone tube to transfer pure water under normal temperature and pressure, dalam menggunakannya sebenarnya dipengaruhi oleh faktor-faktor tertentu seperti tekanan, mediumetc. Di atas hanya untuk referensi.
Pump Head Specifications
| Saluran | 1 |
| Rol | 2 |
| Installation tube method | the whole tube connector （ ID≥1.0mm ） |
| Pressure tube clearance | fine-tune |
| Net weight | 150G |
| Motor | stepper motor / AC motor / DC gear motor / AC gear motor |
Motor specifications
motor stepper
step angle 1.8° \ fase 2 \ tegangan fasa 3.9V \ arus fasa 3A \ resistansi fase 1,3Ω±20% \ phase inductor 5.0mH±20% \insulation resistance ≥100MΩ \ wring definition red line -A ,green line -C ,yellow line -B ,blue line -D
60 DC gear motor
speed range :15rpm ,30rpm , 60rpm ,100rpm (other speeds can be customized)
voltage :DC12V/15W , DC24V/15W
60 AC gear motor
speed range: 15rpm ,30rpm ,60rpm ,100rpm (other speeds can be customized)
voltage: AC220V/10W
Motor sinkron AC
speed range:2.5rpm ,7.5rpm ,20rpm ,30rpm , 60rpm (other speeds can be customized)
voltage ：AC220V/8W
Stepper Motor Dimensions
AC Synchronized Motor Dimensions
DC/AC Gear Motor Dimensions
