Tuote
TFD04 Split Style Syringe Pump
Lyhyt kuvaus:
Virtausalue:
Kanavien enimmäismäärä: 8
Lähetä meille sähköpostia
Introduction
Lead Fluid TFD04 laboratory syringe pump, transmission accuracy error＜±0.5%, can independently control 1～8 channel operation. Split design, more flexible usage. 7-inch HD color touch screen display and operation, powerful functions, simple operation, rich operating information. RS485 -viestintä, support MODBUS protocol.
Ominaisuus
• Can independently control 1～8 channel operation.
• 7-inch HD color touch screen display and operation, bringing a good user experience.
• LF-Touch-OS-ohjelmistojärjestelmä, friendly interface, reliable operation.
• Accurate flow control, transmission accuracy error＜±0.5%.
• Intelligent flow correction function.
• Four working modes：only infuse, only withdraw, infuse/withdraw, vetää/infusoida.
• With fast filling and emptying function.
• Support start delay and cyclic operation.
• Save five groups of formula parameters.
• RS485-yhteys, MODBUS protocol, support the setting of communication parameters, convenient to connect with various control device.
• External control signal controls start, stop, pause, and physical isolation.
• Super anti-interference characteristics, wide voltage design, suitable for complex power supply environment
• High-strength metal case with protective coating, corrosion-resistant and easy to clean.
• The internal circuit is treated with special protection to prevent dust, moisture and static electricity.
Tekninen parametri
| kanava | 1～8 channels，independently control |
| Ruiskun koko | 0.5μL～60mL（replace the execution unit） |
| Syringe selection | built-in mainstream brand syringe specifications, support customization |
| Working mode | infuse, peruuttaa ,infuse/withdraw, vetää/infusoida |
| Accuracy | error＜±0.5%（＞30% of pump stroke） |
| Flow calibration | intelligent guide |
| Display | 7 inch 65565 color LCD |
| Operation method | Touch screen |
| Delay time | 0.1～999 s/min/h |
| Cycles | 0～9999 |
| Cycles interval time | 0.1～999 s/min/h |
| Power-down memory | Memorize parameters set before power off |
| Status signal output | 5V TTL，1 road indicates running status, 1 road indicates direction status |
| Control signal input | 5～24V Wide voltage, control start, stop and pause |
| Viestintä | RS485，support Modbus protocol |
| Virtalähde | AC100-240V，50Hz/60Hz |
| Virrankulutus | Controller 40W+30W (each execution unit) |
| Environment | temperature5～40℃ ，suhteellinen kosteus ＜80% |
| Controller dimension | 200×142×88mm |
| Controller weight | 2.0kg |
| Execution Unit |  |
||
| ZX01 | ZX02 | ZX03 | |
| Ruisku | 5μL～1000μL | 10μL～60mL | 0.5μL～100μL |
| Virtausalue | 0.058nL/min～1.587mL/min | 0.184nL/min～83.318mL/min | 0.005nL/min～152.456μL/min |
| kanava | 1～8 | 1～4 | 1～8 |
| Max stroke of pump | 70mm | 110mm | 70mm |
| Max rated thrust | >2kgf，Adjustable thrust | >10kgf，Adjustable thrust | >1kgf，Adjustable thrust |
| Advance per microstep | 0.198μm/μaskel | 0.156μm/μaskel | 0.1905μm/μaskel |
| Lineaarinen nopeus | 0.635μm/min～95.25mm/min | 1μm/min～150mm/min | 0.6096μm/min～91.44mm/min |
| Execution unit dimension | 195×43.5×70mm | 266×86×76mm | |
| Execution unit weight | 0.85 KG | 1.8 KG | 0.25 KG |
Ruiskun teknisten tietojen ja virtausnopeuden viitetaulukko
ZX02
| Ruiskun koko | Ruiskun tunnus (mm) | Minimi virtausnopeus (nl/min) | Max virtausnopeus (ml/min) |
| 10μl | 0.485 | 0.184 | 0.027 |
| 25μl | 0.729 | 0.417 | 0.0626 |
| 50μl | 1.03 | 0.833 | 0.125 |
| 100μl | 1.457 | 1.667 | 0.250 |
| 250μL | 2.304 | 4.169 | 0.625 |
| 500μL | 3.256 | 8.326 | 1.248 |
| 1ml | 4.699 | 17.342 | 2.601 |
| 5ml | 11.989 | 112.89 | 16.933 |
| 10ml | 14.427 | 163.469 | 24.520 |
| 20ml | 19.05 | 285.027 | 42.754 |
| 30ml | 21.59 | 366.090 | 54.913 |
| 60ml | 26.594 | 555.459 | 83.318 |
ZX03
| Ruiskun koko | Ruiskun tunnus (mm) | Minimi virtausnopeus (nl/min) | Max virtausnopeus (μl/min) |
| 0.5μL | 0.103 | 0.005 | 0.761 |
| 1μL | 0.146 | 0.01 | 1.531 |
| 2μL | 0.206 | 0.020 | 3.047 |
| 5μL | 0.3257 | 0.051 | 7.618 |
| 10μl | 0.485 | 0.112 | 16.893 |
| 25μl | 0.729 | 0.254 | 38.166 |
| 50μl | 1.03 | 0.507 | 76.190 |
| 100μl | 1.457 | 1.016 | 152.456 |
Yllä olevat virtausparametrit saadaan käyttämällä silikoniputkea siirtämään puhdasta vettä normaalilämpötilassa ja paineessa, sen todellisessa käytössä vaikuttavat tietyt tekijät, kuten paine, keskikokoinen jne. Yllä vain viitteeksi.
Ulottuvuus
Execution Unit Dimension （UN：mm)
Controller Dimension （UN：mm)
lausunto：Lopullinen selitysoikeus yllä oleviin tietoihin kuuluu Lead Fluidille.
