Producto
TFD04 Split Style Syringe Pump
Breve descripción:
Rango de flujo:
Número máximo de canales: 8
Envíenos un correo electrónico
Introducción
Lead Fluid TFD04 laboratory syringe pump, transmission accuracy error＜±0.5%, can independently control 1～8 channel operation. Split design, more flexible usage. 7-inch HD color touch screen display and operation, funciones poderosas, operación simple, rich operating information. comunicación RS485, admite protocolo MODBUS.
Característica
• Can independently control 1～8 channel operation.
• 7-inch HD color touch screen display and operation, bringing a good user experience.
• Sistema de software LF-Touch-OS, friendly interface, reliable operation.
• Accurate flow control, transmission accuracy error＜±0.5%.
• Intelligent flow correction function.
• Four working modes：only infuse, only withdraw, infuse/withdraw, withdraw/infuse.
• With fast filling and emptying function.
• Support start delay and cyclic operation.
• Save five groups of formula parameters.
• Comunicación RS485, protocolo MODBUS, support the setting of communication parameters, convenient to connect with various control device.
• External control signal controls start, detener, pause, and physical isolation.
• Super anti-interference characteristics, diseño de amplio voltaje, adecuado para entornos complejos de suministro de energía
• High-strength metal case with protective coating, corrosion-resistant and easy to clean.
• The internal circuit is treated with special protection to prevent dust, moisture and static electricity.
Parámetro técnico
| Canal | 1～8 channels，independently control |
| Syringe size | 0.5μL～60mL（replace the execution unit） |
| Syringe selection | built-in mainstream brand syringe specifications, support customization |
| Working mode | infuse, withdraw ,infuse/withdraw, withdraw/infuse |
| Exactitud | error＜±0.5%（＞30% of pump stroke） |
| Flow calibration | intelligent guide |
| Mostrar | 7 pulgada 65565 color LCD |
| Operation method | Touch screen |
| Delay time | 0.1～999 s/min/h |
| Cycles | 0～9999 |
| Cycles interval time | 0.1～999 s/min/h |
| Power-down memory | Memorize parameters set before power off |
| Status signal output | 5V TTL，1 road indicates running status, 1 road indicates direction status |
| Control signal input | 5～24V Wide voltage, control start, stop and pause |
| Communication | RS485，support Modbus protocol |
| Fuente de alimentación | CA100~240V，50Hz/60Hz |
| El consumo de energía | Controller 40W+30W (each execution unit) |
| Ambiente | temperature5～40℃ ，humedad relativa<80% |
| Controller dimension | 200×142×88mm |
| Controller weight | 2.0kg |
| Execution Unit |  |
||
| ZX01 | ZX02 | ZX03 | |
| Syringe | 5μL～1000μL | 10μL～60mL | 0.5μL～100μL |
| Rango de flujo | 0.058nl/min~1,587 ml/min | 0.184nL/min～83.318mL/min | 0.005nL/min～152.456μL/min |
| Canal | 1～8 | 1～4 | 1～8 |
| Max stroke of pump | 70milímetros | 110milímetros | 70milímetros |
| Max rated thrust | >2kgf，Adjustable thrust | >10kgf，Adjustable thrust | >1kgf，Adjustable thrust |
| Advance per microstep | 0.198μm/μstep | 0.156μm/μstep | 0.1905μm/μstep |
| Linear speed | 0.635μm/min～95.25mm/min | 1μm/min～150mm/min | 0.6096μm/min～91.44mm/min |
| Execution unit dimension | 195×43.5×70mm | 266×86×76mm | |
| Execution unit weight | 0.85 KG | 1.8 KG | 0.25 KG |
Reference Table of Syringe Specifications and Flow Rate
ZX02
| Syringe size | Syringe ID (milímetros) | Min flow rate (nl/min) | Max flow rate (ml/min) |
| 10μl | 0.485 | 0.184 | 0.027 |
| 25μl | 0.729 | 0.417 | 0.0626 |
| 50μl | 1.03 | 0.833 | 0.125 |
| 100μl | 1.457 | 1.667 | 0.250 |
| 250µL | 2.304 | 4.169 | 0.625 |
| 500µL | 3.256 | 8.326 | 1.248 |
| 1mililitros | 4.699 | 17.342 | 2.601 |
| 5mililitros | 11.989 | 112.89 | 16.933 |
| 10mililitros | 14.427 | 163.469 | 24.520 |
| 20mililitros | 19.05 | 285.027 | 42.754 |
| 30mililitros | 21.59 | 366.090 | 54.913 |
| 60mililitros | 26.594 | 555.459 | 83.318 |
ZX03
| Syringe size | Syringe ID (milímetros) | Min flow rate (nl/min) | Max flow rate (μl/min) |
| 0.5µL | 0.103 | 0.005 | 0.761 |
| 1µL | 0.146 | 0.01 | 1.531 |
| 2µL | 0.206 | 0.020 | 3.047 |
| 5µL | 0.3257 | 0.051 | 7.618 |
| 10μl | 0.485 | 0.112 | 16.893 |
| 25μl | 0.729 | 0.254 | 38.166 |
| 50μl | 1.03 | 0.507 | 76.190 |
| 100μl | 1.457 | 1.016 | 152.456 |
Los parámetros de flujo anteriores se obtienen utilizando un tubo de silicona para transferir agua pura a temperatura y presión normales., su uso se ve afectado por factores específicos como la presión, medio, etc.. Arriba solo como referencia.
Dimensión
Execution Unit Dimension （UN：mm）
Controller Dimension （UN：mm）
Declaración：El derecho de explicación final de la información anterior pertenece a Lead Fluid..
