Producto
Bomba peristáltica ODM serie MM10
Breve descripción:
Rango de flujo：≤144ml/min
Número máximo de canales：1
Envíenos un correo electrónico
■Lead Fluid MM10 pump head suitable for wall thickness 0.8-0.92mm, ID 0.13-3.2mm Silicone, Farmacéutico, CLORURO DE POLIVINILO, Viton etc. material tube, it can run continuously at the max flow rate 36 ml/min at 100 rpm, and interval operation the max speed can reach 400 rpm and the flow rate can reach 144ml/min.
■The pump head is made of high-performance plastic material, with high rigidity and strength, and excellent wear resistance.
■The pump head adopts a unique rotary card design. Se puede desmontar y montar sin herramientas.. Es fácil reemplazar el tubo de la bomba y limpiar y mantener.. Hay dos formas de instalar el tubo., Uno es un conector de tubo incorporado y el otro es para instalar el tubo completo..
■Fast-loading pump head, the inlet and outlet end can be installed in any direction on the upper, down and side to meet the needs of different working conditions.
■Matching 12V/24V DC gear motor, stepper motor and other micro-motors.
■Small size, instalación conveniente y operación simple.
■ It is suitable for supporting various small instruments and equipment to meet the needs of micro-injection, enrojecimiento, y drenaje.
Material
| Caparazón | PC |
| Rodillo | PET |
Flow Rate Parameter
Material del tubo：Silicona, Farmacéutico, CLORURO DE POLIVINILO, Viton Wall thickness0.8-0.92mm
| ID（mm) | 0.25 | 0.5 | 1 | 1.52 | 2 | 2.4 | 3.2 | |
| ml/rpm | 0.002 | 0.014 | 0.037 | 0.1 | 0.148 | 0.23 | 0.36 | |
| ml/min (continuous working max100rpm) | 0.17 | 1.4 | 3.7 | 10 | 15 | 23 | 36 | |
| ml/min ( interval working max 400rpm) | 0.68 | 5.6 | 14.8 | 40 | 60 | 92 | 144 | |
★ Los parámetros de flujo anteriores se obtienen utilizando un tubo de silicona para transferir agua pura a temperatura y presión normales., in actually using it is effected by specific factors such as pressure, medio, etc.. Arriba solo como referencia
Especificaciones
| Canal | 1 |
| Rodillo | 3 |
| Rango de flujo | ≤144ml/min |
| Velocidad | continuous working ≤100rpm |
| interval working ≤400rpm(Please confirm with Lead Fluid engineer in advance) | |
| método de tubería | Tube connector built-in(ID ≥1.6mm) |
| Whole Tube | |
| Ajuste de liquidación | Fixed clearance |
| Motor | 12V/24V DC gear motor/stepper motor |
| Presión de transmisión | ≤0.10MPa |
| Temperatura de trabajo | 0~40℃ |
| Fuerza | ＜10W |
Motor Specification
| DC brush motor | Velocidad：35rpm, 50rpm, 100rpm, 130rpm, 178rpm, 200rpm, 320rpm, 409rpm |
| Voltage：DC12V/3W, DC24V/3W | |
| Precisión de velocidad： ≤±10% | |
| Service life：1000 horas |
| DC brushless motor | Velocidad：45rpm, 68rpm, 120rpm, 150rpm, 250rpm, 350rpm |
| Voltage：DC12V/3W, DC24V/3W | |
| Velocidad ：≤±10% |
| 20 Stepper motor | Motor parameter: ángulo de paso 1,8° \ fase 2 \ voltaje de fase 3.9V \ phase current 0.6A \phase resistance 6.5Ω±10% \ phase inductor 2.2mH±20% |
| Rango de velocidad: ≤200rpm |
Dimensión (DC gear motor）
Dimensión (20 Stepper motor)
