Correo electrónico:[email protected]


Producto

2
3

DT Multi-Channel Pump Head

Breve descripción:

Rango de flujo:

Número máximo de canales:

Envíenos un correo electrónico

DT Multi-Channel Pump Head

DT pump head is designed for small and medium flow, multichannel fluid transmission. Plug type card is convenient and quick to replace tube, pump head is equipped with high quality stainless steel roller, gap adjustment multi-roller design reduces pulsation effectively. Pump head adopts PPS material, it is good performance for chemical resistance.

Material de la cáscara: PPP

Card material: PPP

Rodillo: SS304

Roller shaft: SS304

Descripción

■ DT series pump head is designed for small and medium flow, multichannel fluidtransmission, according to different tubing size, there are two series DT10 series and DT15 series.

■ DT10 pump head single channel flow range 0.00023~64ml/min, suitable for tubing13#, 14# and ID 0.13~3.2mm, wall thickness 0.8~1mm.

■ DT15 pump head single channel flow range 0.067~2240ml/min, suitable for tubing 19#, 16#, 25#, 17#.

■ The plug card structure that can be installed and removed independently, it is convenient and quick to replace and fix the pump tubing.

■ Multi-roller design reduces pulsation effectively.

■ The roller is made of high-strength stainless steel, and the shell and card are made of PPS, which is resistant to high temperature and excellent chemical resistance.

■ The roller is a bearing design, gap adjustment andthe flow consistency is better.

■ Can instead of 2/4 YZ15 pump heads, smaller size.

■ Can match stepper motor, servo motor, AC gear motor, DC gear motor etc.

 

 

Especificación

Pump Head Material

Shell PPP
Card PPP
Rodillo SS304
Roller shaft SS304

 

Pump Head Specification

DT10 series

Canal 1, 2, 4, 8
Rodillo 8
Velocidad 0.1~100 rpm
Rango de flujo 0.00023~64 mL/min
Ajuste de espacio Ajustable
Withstand liquid temperature Within 200℃
Corrosion resistance Resistant to most acid, álcali, Líquidos salinos y disolventes orgánicos.
Motor Stepper motor, Servo motor, DC gear motor, AC gear motor

DT15 series

Canal 1, 2, 4
Rodillo 4
Velocidad 0.1~600rpm
Rango de flujo 0.067~2240 mL/min
Ajuste de espacio Ajustable
Withstand liquid temperature Within 200℃
Corrosion resistance Resistant to most acid, álcali, Líquidos salinos y disolventes orgánicos.
Motor Stepper motor, Servo motor, DC gear motor, AC gear motor

DT10 Flow Rate Parameter

Tubing material:Silicona, Farmacéutico, Vitón, Chemical, Tygon 3603
espesor de pared:0.8~1mm
13#14# espesor de pared:1.6milímetros
IDENTIFICACIÓN (milímetros) 0.13 0.25 1 2 2.4 3.2 0.8 1.6
13# 14#
ml/rpm 0.0023 0.0069 0.07 0.3 0.39 0.64 0.05 0.18
ml/min (Continuous working max100pm) 0.23 0.69 7.4 30 39 64 5 18

DT15 Flow Rate Parameter

Tubing material:Silicona, Farmacéutico, Vitón, Chemical, Tygon 3603 espesor de pared:1.6milímetros
IDENTIFICACIÓN (milímetros) 2.4 3.1 4.8 6.4
19# 16# 25# 17#
ml/rpm 0.67 1.0 2.2 3.7
ml/min (Continuous working max 600pm) 400 600 1320 2240

Los parámetros de flujo anteriores se obtienen utilizando un tubo de silicona para transferir agua pura a temperatura y presión normales., su uso se ve afectado por factores específicos como la presión, medio, medio ambiente, etc..

DT10 tubing installation procedure

 

DT15 tubing installation procedure

 

DIMENSIÓN

DT10 dimension

DT15 dimension

 

Leave Your Message