Produkt
TFD04 Split Style Syringe Pump
Kort beskrivelse:
Flowområde:
Max antal kanal: 8
Send e-mail til os
Introduction
Lead Fluid TFD04 laboratory syringe pump, transmission accuracy error＜±0.5%, can independently control 1～8 channel operation. Split design, more flexible usage. 7-inch HD color touch screen display and operation, powerful functions, Enkel operation, rich operating information. RS485 kommunikation, support MODBUS protocol.
Feature
• Can independently control 1～8 channel operation.
• 7-inch HD color touch screen display and operation, bringing a good user experience.
• LF-Touch-OS softwaresystem, friendly interface, reliable operation.
• Accurate flow control, transmission accuracy error＜±0.5%.
• Intelligent flow correction function.
• Four working modes：only infuse, only withdraw, infuse/withdraw, withdraw/infuse.
• With fast filling and emptying function.
• Support start delay and cyclic operation.
• Save five groups of formula parameters.
• RS485 communication, MODBUS protocol, support the setting of communication parameters, convenient to connect with various control device.
• External control signal controls start, stop, pause, and physical isolation.
• Super anti-interference characteristics, bredspændingsdesign, velegnet til komplekse strømforsyningsmiljøer
• High-strength metal case with protective coating, corrosion-resistant and easy to clean.
• The internal circuit is treated with special protection to prevent dust, moisture and static electricity.
Teknisk parameter
| Kanal | 1～8 channels，independently control |
| Syringe size | 0.5μL～60mL（replace the execution unit） |
| Syringe selection | built-in mainstream brand syringe specifications, support customization |
| Working mode | infuse, withdraw ,infuse/withdraw, withdraw/infuse |
| Nøjagtighed | error＜±0.5%（＞30% of pump stroke） |
| Flow calibration | intelligent guide |
| Display | 7 inch 65565 color LCD |
| Operation method | Touch screen |
| Delay time | 0.1～999 s/min/h |
| Cycles | 0～9999 |
| Cycles interval time | 0.1～999 s/min/h |
| Power-down memory | Memorize parameters set before power off |
| Status signal output | 5V TTL，1 road indicates running status, 1 road indicates direction status |
| Control signal input | 5～24V Wide voltage, control start, stop and pause |
| Communication | RS485，support Modbus protocol |
| Strømforsyning | AC100 ~ 240V，50Hz/60Hz |
| Strømforbrug | Controller 40W+30W (each execution unit) |
| Environment | temperature5～40℃ ，relativ luftfugtighed 80 % |
| Controller dimension | 200×142×88mm |
| Controller weight | 2.0kg |
| Execution Unit |  |
||
| ZX01 | ZX02 | ZX03 | |
| Syringe | 5μL～1000μL | 10μL～60mL | 0.5μL～100μL |
| Flowområde | 0.058nL/min～1.587mL/min | 0.184nL/min～83.318mL/min | 0.005nL/min～152.456μL/min |
| Kanal | 1～8 | 1～4 | 1～8 |
| Max stroke of pump | 70mm | 110mm | 70mm |
| Max rated thrust | >2kgf，Adjustable thrust | >10kgf，Adjustable thrust | >1kgf，Adjustable thrust |
| Advance per microstep | 0.198μm/μstep | 0.156μm/μstep | 0.1905μm/μstep |
| Linear speed | 0.635μm/min～95.25mm/min | 1μm/min～150mm/min | 0.6096μm/min～91.44mm/min |
| Execution unit dimension | 195×43.5×70mm | 266×86×76mm | |
| Execution unit weight | 0.85 KG | 1.8 KG | 0.25 KG |
Reference Table of Syringe Specifications and Flow Rate
ZX02
| Syringe size | Syringe ID (mm) | Min flow rate (nl/min) | Max flow rate (ml/min) |
| 10μl | 0.485 | 0.184 | 0.027 |
| 25μl | 0.729 | 0.417 | 0.0626 |
| 50μl | 1.03 | 0.833 | 0.125 |
| 100μl | 1.457 | 1.667 | 0.250 |
| 250μL | 2.304 | 4.169 | 0.625 |
| 500μL | 3.256 | 8.326 | 1.248 |
| 1mL | 4.699 | 17.342 | 2.601 |
| 5mL | 11.989 | 112.89 | 16.933 |
| 10mL | 14.427 | 163.469 | 24.520 |
| 20mL | 19.05 | 285.027 | 42.754 |
| 30mL | 21.59 | 366.090 | 54.913 |
| 60mL | 26.594 | 555.459 | 83.318 |
ZX03
| Syringe size | Syringe ID (mm) | Min flow rate (nl/min) | Max flow rate (μl/min) |
| 0.5μL | 0.103 | 0.005 | 0.761 |
| 1μL | 0.146 | 0.01 | 1.531 |
| 2μL | 0.206 | 0.020 | 3.047 |
| 5μL | 0.3257 | 0.051 | 7.618 |
| 10μl | 0.485 | 0.112 | 16.893 |
| 25μl | 0.729 | 0.254 | 38.166 |
| 50μl | 1.03 | 0.507 | 76.190 |
| 100μl | 1.457 | 1.016 | 152.456 |
Ovenstående flowparametre opnås ved at bruge silikonerør til at overføre rent vand under normal temperatur og tryk, ved faktisk at bruge det påvirkes af specifikke faktorer såsom tryk, medium osv. Ovenstående kun til reference.
Dimension
Execution Unit Dimension （UN：mm）
Controller Dimension （UN：mm）
Erklæring：Den endelige forklaringsret til ovenstående information tilhører Lead Fluid.
