Produkt
MM10 Series ODM Peristaltic Pump
Kort beskrivelse:
Flowområde：≤144ml/min
Max number of channels：1
Send e-mail til os
■Lead Fluid MM10 pump head suitable for wall thickness 0.8-0.92mm, ID 0.13-3.2mm Silicone, Pharmed, PVC, Viton etc. material tube, it can run continuously at the max flow rate 36 ml/min at 100 rpm, and interval operation the max speed can reach 400 rpm and the flow rate can reach 144ml/min.
■The pump head is made of high-performance plastic material, with high rigidity and strength, and excellent wear resistance.
■The pump head adopts a unique rotary card design. It can be disassembled and assembled without tools. It is easy to replace the pump tube and clean up and maintain. There are two ways to install tube, one is tube connector built-in and the other is to install whole tube.
■Fast-loading pump head, the inlet and outlet end can be installed in any direction on the upper, down and side to meet the needs of different working conditions.
■Matching 12V/24V DC gear motor, stepper motor and other micro-motors.
■Small size, convenient installation and simple operation.
■ It is suitable for supporting various small instruments and equipment to meet the needs of micro-injection, flushing, and drainage.
Materiale
| Shell | PC |
| Rulle | PET |
Flow Rate Parameter
Rørmateriale：Silikone, Pharmed, PVC, Viton Wall thickness0.8-0.92mm
| ID（mm) | 0.25 | 0.5 | 1 | 1.52 | 2 | 2.4 | 3.2 | |
| ml/rpm | 0.002 | 0.014 | 0.037 | 0.1 | 0.148 | 0.23 | 0.36 | |
| ml/min (continuous working max100rpm) | 0.17 | 1.4 | 3.7 | 10 | 15 | 23 | 36 | |
| ml/min ( interval working max 400rpm) | 0.68 | 5.6 | 14.8 | 40 | 60 | 92 | 144 | |
★ Above flow parameters are obtained by using silicone tube to transfer pure water under normal temperature and pressure, in actually using it is effected by specific factors such as pressure, medium osv. Ovenstående kun til reference
Specifikationer
| Kanal | 1 |
| Rulle | 3 |
| Flowområde | ≤144ml/min |
| Hastighed | continuous working ≤100rpm |
| interval working ≤400rpm(Please confirm with Lead Fluid engineer in advance) | |
| Tubing method | Tube connector built-in(ID ≥1.6mm) |
| Whole Tube | |
| Justering af frigang | Fixed clearance |
| Motor | 12V/24V DC gear motor/stepper motor |
| Transmission pressure | ≤0.10MPa |
| Working temperature | 0~40℃ |
| Power | ＜10W |
Motor Specification
| DC brush motor | Hastighed：35rpm, 50rpm, 100rpm, 130rpm, 178rpm, 200rpm, 320rpm, 409rpm |
| Voltage：DC12V/3W, DC24V/3W | |
| Hastighedsnøjagtighed： ≤±10% | |
| Service life：1000 timer |
| DC brushless motor | Hastighed：45rpm, 68rpm, 120rpm, 150rpm, 250rpm, 350rpm |
| Voltage：DC12V/3W, DC24V/3W | |
| Hastighed ：≤±10% |
| 20 Stepper motor | Motor parameter: step angle 1.8° \ phase 2 \ phase voltage3.9V \ phase current 0.6A \phase resistance 6.5Ω±10% \ phase inductor 2.2mH±20% |
| Hastighedsområde: ≤200rpm |
Dimension (DC gear motor）
Dimension (20 Stepper motor)
